Andy who responded on the Aristocrat machine discovered and is also from Melbourne may have seen this handle arrangement before. I am fairly certain as mentioned, it looks there should be a pump attached to the part at the top and a rod from it would go through the square connector on the end of the handle assembly. Never seen this type on a Aristocrat before. In fact the guy who has the earlier made “Aristocrat” machine on this thread shared some pictures of his cabinet which is the same simple setup as most Clubmasters.drphat wrote: ↑Mon Apr 15, 2019 2:21 pmThank you very much Treefrog!
The handle mech design is different, see my pic, mine seems to have an extra few linkages plus the device hanging from the top of the cabinet.
Appreciate the lock pics as that has cleared it up. This has barrel (cam) locks but do not lock onto anything. And I couldn't work out why there were two lugs either side!
If I can't get them here, I would really appreciate the link to buy in the UK.
Thank you so much, and the last pic is my version of your Starlite!!
Users browsing this forum: No registered users and 1 guest