Building a slot machine from scratch? You're not alone in your madness.
User avatar
yaksplat
Posts: 99
Joined: Thu Oct 09, 2008 3:53 pm
Contact:

Re: Digger project

Postby yaksplat » Wed May 01, 2019 2:56 am

That looks great!

The toughest part for me was getting the tray all set to slide into the cabinet. There are notches on each of the four corners to slide the tray in. Once the front corners engage the tray, it's held up and solid. My prize ramp was installed after the tray and just has screws holding everything together so it comes apart easily.

User avatar
ddstoys
Posts: 301
Joined: Sun May 12, 2013 4:48 am

Re: Digger project

Postby ddstoys » Thu May 02, 2019 8:36 am

Here’s the almost finished product. I had to use my older mech as the Tonka one sits lower than the plans where designed for 😂😂
213CE2AA-6A9B-40A6-9C59-5A6C0F228949a.jpg
0F257D98-2B2D-4CAE-9885-8069B6B611BEa.jpg
86099E43-E06E-494D-AEF8-7E4714270464a.jpg

User avatar
ddstoys
Posts: 301
Joined: Sun May 12, 2013 4:48 am

Re: Digger project

Postby ddstoys » Thu May 09, 2019 9:34 am

And then there were two.
6AD466A7-40C1-4F4C-8D25-03A18AE78617a.jpg
37FBE5F3-9FF5-46DC-85CD-10E768AFDD74a.jpg
EE10B2E0-B56F-4AE3-BEF9-8E209A9581B4a.jpg

User avatar
yaksplat
Posts: 99
Joined: Thu Oct 09, 2008 3:53 pm
Contact:

Re: Digger project

Postby yaksplat » Sat May 11, 2019 3:51 am

Just like magic?

User avatar
ddstoys
Posts: 301
Joined: Sun May 12, 2013 4:48 am

Re: Digger project

Postby ddstoys » Sun May 12, 2019 10:48 am

Yep, and all thanks to you - without your posts I probably wouldn’t have touched these.

I’m just about to send you something for your 👌


Who is online

Users browsing this forum: No registered users and 2 guests