Digger project
Re: Digger project
That looks great!
The toughest part for me was getting the tray all set to slide into the cabinet. There are notches on each of the four corners to slide the tray in. Once the front corners engage the tray, it's held up and solid. My prize ramp was installed after the tray and just has screws holding everything together so it comes apart easily.
The toughest part for me was getting the tray all set to slide into the cabinet. There are notches on each of the four corners to slide the tray in. Once the front corners engage the tray, it's held up and solid. My prize ramp was installed after the tray and just has screws holding everything together so it comes apart easily.
Re: Digger project
Here’s the almost finished product. I had to use my older mech as the Tonka one sits lower than the plans where designed for
Re: Digger project
Yep, and all thanks to you - without your posts I probably wouldn’t have touched these.
I’m just about to send you something for your
I’m just about to send you something for your
Re: Digger project
Fantastic Job! I am glad to see the progress!! I had been lurking at topic on the forum for a couple years, and finally made an account!
Re: Digger project
Great Job!
I'm a late arriver but enjoyed reading on your progress...
Did I miss it or did you post the plans somewhere for the cabinet you built?
Thank you...
I'm a late arriver but enjoyed reading on your progress...
Did I miss it or did you post the plans somewhere for the cabinet you built?
Thank you...
Who is online
Users browsing this forum: No registered users and 15 guests