Building a slot machine from scratch? You're not alone in your madness.
Posts: 1
Joined: Fri May 31, 2019 9:47 am

Recommendation for a slot cabinet

Postby jpx072 » Fri May 31, 2019 9:48 am

Hello guys
I have aquired an awesome slot cabinet with two monitors (one is touchscreen), which is controlled by a small factor PC with 1ghz cpu and 512mb ram. There is also an interface board plugged through usb ports which has 72 pin jamma-like connector to interface buttons, coin mech, lights and everything.
Problem is that the program that was in there is dead. It was loaded on a SSD-like drive (more like USB for IDE slot) and it's completely dead.

I am looking for any recommendation for this cabinet, something that can be run on this PC that is inside (motherboard is EPIA EX (EOL) - VIA Technologies).
I was thinking MAME, but maybe you guys know about something better, not asking to send me any roms or anything (don't want to break the forum rules), just tips, names anything....

Please help me!!!
Vector lynx II.jpg

User avatar
Posts: 584
Joined: Wed Oct 16, 2013 12:56 am

Re: Recommendation for a slot cabinet

Postby moonriver » Fri May 31, 2019 10:39 am

Its completely dead because the software license ran out, much the same as modern fruit machines. Now they have a life built into the software so they can't go on to be used for private/home use.

User avatar
Posts: 3879
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Recommendation for a slot cabinet

Postby treefrog » Fri May 31, 2019 11:05 am

Ha ha, that’s smart.... seems to happen a lot now in electronic products... I never knew until recently digital cameras have a click lifetime built in from the manufacturers. Also I guess a way of them continuing to make money to cover software management costs and support.

User avatar
Posts: 752
Joined: Tue Oct 31, 2017 3:37 pm

Re: Recommendation for a slot cabinet

Postby brigham » Fri May 31, 2019 11:54 am

There's a Forum for these, where they share the technology for getting old computerised slot machines working again:
...might get you there!

Who is online

Users browsing this forum: No registered users and 2 guests