Brenco Match a Fruit

Discuss our on-site auctions and other slot machine auctions.
User avatar
gameswat
Posts: 2196
Joined: Sat May 30, 2009 5:17 am
Reaction score: 21
Location: perth, australia

Re: Brenco Match a Fruit

Post by gameswat »

Snotalot, seems that spyware I hacked into your account is working well. :tut

Now that drive wheel has me wondering? It's geared through the different sizes of the rubber drive wheel and alloy wheel it rotates, so that would allow a different stop position every play. But usually the circuit to run this would make those (currently) free floating contacts be open when the (missing) lever drops into the fibre disc channel, thus cutting the motor circuit and stopping the drive wheel after one rotation of the fibre disc. Then on the next Penny dropped a coin switch would momentarily start the motor enough to allow the lever to lift out of the channel and close the circuit to the motor and drive the wheel until it's done the full 360 degree circuit. I guess some closer and different angle photos will clear this up. And maybe if you could draw us a complete wiring schematic that would help too thanks. !OMFG! :o :burp:
classicgambler
Posts: 242
Joined: Tue Oct 16, 2012 10:31 pm
Reaction score: 0

Re: Brenco Match a Fruit

Post by classicgambler »

There is a diagram on the back board so I will get a photo of this for you on Thursday as that is when I'm back there.
slotalot wrote:You will need to make a double ended wiper (see white arrow) in photo. This will rotate making 2 sets of contacts.
Right, I will get onto that then. Cheers for that stu.
classicgambler
Posts: 242
Joined: Tue Oct 16, 2012 10:31 pm
Reaction score: 0

Re: Brenco Match a Fruit

Post by classicgambler »

I managed to get there today and take some photos for you. Here they are:
Attachments
match-a-fruit-3a.jpg
match-a-fruit-2a.jpg
match-a-fruit-1a.jpg
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Brenco Match a Fruit

Post by slotalot »

Starting at the white arrow and working “clockwise” the first 11 contacts are common to the RED input wire.
Starting at the white arrow working ant-clockwise the 11 payout outputs are as follows.
BELL (brown wire)
LEMON
ORANGE
CHERRY
PLUMB
LEMON
MELLON
CHERRY
LEMON
PLUMB
CHERRY
in which case you will definitely need a double ended wiper to make the connections as stated earlier in this thread.
I hope this might help you make sense of it all :!?!:
Attachments
Capture.JPG
Potless
Posts: 62
Joined: Wed Jul 07, 2010 10:07 pm
Reaction score: 0

Re: Brenco Match a Fruit

Post by Potless »

I was wondering what the approximate dimensions of the Match-A-Fruit are? I wouldn't mind having a go at building one from scratch....
User avatar
brigham
Posts: 1180
Joined: Tue Oct 31, 2017 3:37 pm
Reaction score: 2

Re: Brenco Match a Fruit

Post by brigham »

Attachments
s-l16002a.jpg
User avatar
moonriver
Posts: 930
Joined: Wed Oct 16, 2013 12:56 am
Reaction score: 3

Re: Brenco Match a Fruit

Post by moonriver »

In such lovely condition too.
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests