Electrodart on eBay
- special when lit
- Posts: 495
- Joined: Fri Dec 17, 2004 4:46 pm
- Reaction score: 2
- Location: Derby
Re: Electrodart on eBay
Finally finished the woodwormy Electrodart. Electrics were a bit tricky, but after a bit of work, they now all work OK. Had to replace the capacitor on the play relay, & also fitted a bridge rectifier in place of the old selenium one, fitted 2 LED bulbs for the main lighting, as they run a lot cooler & will be less likely to damage the screen printed glass.
I also fitted 2 bulbs behind the lower darts. There were cut-outs in the mech board, but there had never been any bulbs fitted, probably a cost saving move by Jamiesons.
Still has a slight fault with the payout slide not fully returning, & jamming up with coins, but I've ordered some graphite powder, & hopefully that'll sort it.
Also need a payout cup, if anyone's got one.
I also fitted 2 bulbs behind the lower darts. There were cut-outs in the mech board, but there had never been any bulbs fitted, probably a cost saving move by Jamiesons.
Still has a slight fault with the payout slide not fully returning, & jamming up with coins, but I've ordered some graphite powder, & hopefully that'll sort it.
Also need a payout cup, if anyone's got one.
Re: Electrodart on eBay
Splendid job. I haven't found one of these yet, or the other two in the range.
That's a very early Autofruit. Mine's much more 'refined'.
I'd love to get a complete catalogue of Jamieson's machines; especially the 1950s and '60s types.
That's a very early Autofruit. Mine's much more 'refined'.
I'd love to get a complete catalogue of Jamieson's machines; especially the 1950s and '60s types.
-
- Site Admin
- Posts: 6638
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 56
- Location: The Black Country
Re: Electrodart on eBay
What's the outside diameter of the cup lip (widest measurement inside the cup surround)? I have some unplated brass cups.
- special when lit
- Posts: 495
- Joined: Fri Dec 17, 2004 4:46 pm
- Reaction score: 2
- Location: Derby
-
- Posts: 762
- Joined: Thu Feb 02, 2006 6:05 pm
- Reaction score: 0
- Location: staffordshire
- special when lit
- Posts: 495
- Joined: Fri Dec 17, 2004 4:46 pm
- Reaction score: 2
- Location: Derby
-
- Site Admin
- Posts: 6638
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 56
- Location: The Black Country
- special when lit
- Posts: 495
- Joined: Fri Dec 17, 2004 4:46 pm
- Reaction score: 2
- Location: Derby
Re: Electrodart on eBay
Thanks to Mr Pennymachines, I now have the finishing touch fitted to the Electrodart.
Re: Electrodart on eBay
I just stumbled upon this thread. I have an Electrodart machine with all original parts except for the main button. My dad gave it to me many years ago. I am trying to find out the value of the game. Does anyone have an estimate? I am in the US and have never seen another one.
Thanks for any help.
Thanks for any help.
Re: Electrodart on eBay
Can’t tell you in US, but I know a Jamieson’s machine had been on eBay out there for a long time with a high price tag. Key is if it is working, then it will be worth more, as these are tricky to address faults…
Who is online
Users browsing this forum: No registered users and 20 guests