Page 2 of 3

Re: Las Vegas bandit

Posted: Sun Aug 26, 2018 1:52 pm
by pennymachines
The Old Dog and Anvil - we always end up there eventually.

Re: Las Vegas bandit

Posted: Sun Aug 26, 2018 1:53 pm
by badpenny
I believe it's your round Mr P.

BP !!CHEERS!!

Re: Las Vegas bandit

Posted: Sun Feb 16, 2020 5:20 pm
by dutchboy
I just found an old piece of aluminium at my work and remembered my machine needed the window surround. It’s a bit rough yet but looks much better for the moment till I will find an original.
Lately there were not so many posts over here, so I think I need to contribute.
Greetings.

Re: Las Vegas bandit

Posted: Sun Feb 16, 2020 7:57 pm
by treefrog
Yes very good Dutchboy, I would not have know.

Yes very quiet on the site and have laid low myself for a while. I have been busy though and restored two Aristocrats and now working on a pile of Beromat type machines I took apart years ago and trying to piece together.....
576EB04E-4A7B-4526-B90D-F6C6743E3DE2a.jpg
5C264202-5A1A-4866-AEEF-347D74A45891a.jpg
Also been finally learning Paint Shop Pro after buying a few years back and finding it too complicated.....think I have now worked out enough to do some artwork myself at last...
Before
454B3778-5ED6-4EFC-BD0E-6E7EBECE3506a.jpg
After
3FD56186-A15C-4F7E-85AF-92F6EDFA136F.jpeg
Maybe everyone else is busy on machines or just can’t be bothered anymore..

Re: Las Vegas bandit

Posted: Mon Feb 17, 2020 7:07 pm
by dutchboy
Very nice done on the strips treefrog. I have to say I don’t even have a desktop these days.
So I am not the only one who takes a machine apart and leave it for a very long time :D . I only have to paint my Mills open front and make two coin tubes. Maybe in spring the time will be right.

Re: Las Vegas bandit

Posted: Thu Feb 27, 2020 11:22 pm
by cheeky
Very nice job on the reel strip. 👍

Re: Las Vegas bandit

Posted: Mon Mar 02, 2020 2:21 pm
by chris rideout
dutchboy wrote:
Sun Feb 16, 2020 5:20 pm
I just found an old piece of aluminium at my work and remembered my machine needed the window surround. It’s a bit rough yet but looks much better for the moment till I will find an original.
Lately there were not so many posts over here, so I think I need to contribute.
Greetings.
Your machine looks very much like a "Mad Money" by Sega. Most of them were red and black. The top box is missing. Good luck with your restoration.

Re: Las Vegas bandit

Posted: Mon Mar 02, 2020 7:51 pm
by coppinpr
I think the machine is a clone not a Sega so the "las Vegas" logo is most likley original

Re: Las Vegas bandit

Posted: Tue Mar 03, 2020 1:08 pm
by chris rideout
badpenny wrote:
Sat Aug 25, 2018 3:51 pm
Your photo is of the dog and anvil.

BP !BOGROLL!
Is the dog piece upside down? Either it is or mine is! I thought the longest part was at the bottom.

Re: Las Vegas bandit

Posted: Tue Mar 03, 2020 3:46 pm
by badpenny
The photo is on end, it needs turning 90° clockwise.

BP :cool: