Mills clone

Discuss our on-site auctions and other slot machine auctions.
Post Reply
catapultman
Posts: 1
Joined: Tue Apr 06, 2021 2:05 pm

Mills clone

Post by catapultman »


20210406_134815a.jpg

Hello
Sorry if this has been covered before (I'm sure it has, but I can't find anything).
I bought a machine a little while ago and although it's great fun, I thought I'd find out some info about it, and there is the problem - it's labelled as a Mills, but it looks like an almost identical copy of the Sega Money Matador badged as a "Berkeley".
Am I the proud owner of a Sega Mills Berkeley machine, :D or none of these?
I'm also thinking of getting some of it re-chromed. Can anyone recommend anyone to do this? I'm in north Essex.
Thanks for any help.
User avatar
treefrog
Posts: 3985
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Mills clone

Post by treefrog »

There probably was quite a few companies who made clone machines, Berkeley being one of them. I have had many variants and have one now with large embossed JCW on all the castings.....

In terms of chromers, I am in your area, but cannot recommend anyone, but there are loads of people have recommended around the country if you do a search or look in Services & Supplies. You may want to consider a good spray job like hard enamel paint instead, could work out cheaper and cover pitted parts that chrome will never work on.
User avatar
coppinpr
Posts: 4261
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Mills clone

Post by coppinpr »

A nice looking machine! As Tom says a lot of us have had one of the Sega clones at one time or another. They all have what amounts to a Mills mech (which is all but the same as the sega anyway) the two main giveaways are they never have the "Sega" logo cast into the lower front casting and (for some reason I've never known) the top rear bonnet on a sega will not fit on a clone.. does it have its lights? Is the top light box glass broken, its a good one, if it's broke a repro might be nice, and a better designed lower JP glass. I agree with Tom, re-chroming a bit expensive for a machine of this value, If the coin tray is in a bad way it can look good in black if well sprayed
User avatar
brigham
Posts: 811
Joined: Tue Oct 31, 2017 3:37 pm

Re: Mills clone

Post by brigham »

I sprayed the coin-tray silver on one of mine, but in hindsight, black might have been better.
The Berkeley tends not to have ribbing in the polished cabinet side strips, they are flat-faced.
I've seen that 'pin-up' top box artwork before; done by a travelling showman based in Hetton-le-Hole, Co. Durham. Is there a Durham postcode painted prominently on the inside of the case?
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 8 guests