Wood repair/reinforcement product & spring supplier

Advice and guidance on repair and restoration techniques.
Post Reply
User avatar
wembleylion
Posts: 184
Joined: Wed Oct 30, 2013 8:07 pm
Reaction score: 2
Location: Norfolk UK

Wood repair/reinforcement product & spring supplier

Post by wembleylion »

Here are two products that might be of use in restoring old machines.

The first is the West System. This is an epoxy resin based system for the building and repairing of wood and glass fibre products and is used extensively in the wooden boat building industry and for repairs to wooden structures and architecture in old / listed buildings. Mixed with a slow acting hardener it can be used to reinforce rotten timber and may be useful for repairing machine cases, especially where carved designs would be lost by replacing the rotten timber with new.
The epoxy resin can be mixed so as to soak into / through rotten timber and when it hardens it will form a resin reinforcement within the wood; very useful, perhaps, for entombing woodworm.
West Systems also supply a range of fillers that can be added to build up lost sections.
There is a lot of information and scenarios on the West Systems web site.

This link shows how the product could be used for repairs to wooden machine cases;
Tutorial for Household Repairs; Section 2, Repairing Damaged Wood; Sub section, Repairing Windows and Doors; Repairing Thresholds and Sills
http://www.westsysteminternational.com/ ... r_uses.pdf

This is a link to the main West Systems website;
http://www.westsysteminternational.com/ ... est-system

The second is Entex Stock Springs, who supply a HUGE range of springs in lengths and with hooked ends. Our Allwin machines mostly use ¼” and 5/16” diameter springs for the hammer action and these are available as Tension Lengths, 2ft long, in five wire thickness.
http://www.entexstocksprings.co.uk/inde ... nit=inches

I have no connection with either of these companies other than being a satisfied user.

John
User avatar
badpenny
Forum Moderator
Posts: 7212
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Two products that might be of use in restoring old machi

Post by badpenny »

Marvellous stuff John.
I've always been a fan of epoxy stuff as well as springs, I love springs me.

Being a canal boater (when I'm not slottering) I was using similar stuff in the 1970s to keep my marine ply boats together.
Of course the technology involved in such epoxy resins was quite new then. Forget COSHH ...... H&S hadn't even been dreamt of at that time. I must have ingested so much of it I need never fear rotting.

Now my boat is steel there's only one such product I buy Creeping Crack Cure I don't need it, I just can't resist it. Fantastic name, always make me guffaw like a schoolboy. I must have boxes of the stuff.

BP
User avatar
john t peterson
Posts: 1335
Joined: Wed Dec 01, 2004 5:40 pm
Reaction score: 7
Location: USA

Re: Two products that might be of use in restoring old machi

Post by john t peterson »

"Guffaw" said BP, the Shakespeare of coin-op. :HaHa:

J Peterson
Guffawing in America :lol:
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests