Uniselector wanted
Hi, I am restoring an electro-mechanical machine for a friend, and am looking for a uniselector.
It must be a Siemens 15A uniselector. The ones made by Strowger will not do for this job.
(see photo)
It needs to have 25 stops and at least 6 rows of contacts.
If anyone has one to spare please PM me with details.

It must be a Siemens 15A uniselector. The ones made by Strowger will not do for this job.

It needs to have 25 stops and at least 6 rows of contacts.

If anyone has one to spare please PM me with details.

-
- uniselector type.PNG (87.99 KiB) Viewed 2724 times
Re: uniselector wanted
Hi Stu .........
I've got two, however I don't know what make or spec they are.
I'm hopping around with one arm in a sling at the moment.
Naturally the box containing the said "beasties" is in my garage and will necessitate the moving of .....
* A compressor
* 4 project bandits
* Harley Davidson
* Goliath (Bryans) crane
So if it's alright with you, could you wait and see if anyone else has one before I coerce She Who Must Be Obeyed into pulling her weight around here for a change?
I've got two, however I don't know what make or spec they are.
I'm hopping around with one arm in a sling at the moment.
Naturally the box containing the said "beasties" is in my garage and will necessitate the moving of .....
* A compressor
* 4 project bandits
* Harley Davidson
* Goliath (Bryans) crane
So if it's alright with you, could you wait and see if anyone else has one before I coerce She Who Must Be Obeyed into pulling her weight around here for a change?

Re: uniselector wanted
Hello my dear friend.
I hope said arm is mending after your spot of self restoration.
Thanks for being the first to offer help. As for S.H.M.B.O. moving heavy boxes? I would never be brave enough to suggest such a thing
unless of course she is reading this and feels very very sorry for me
.............
I hope it is not too long before you are back to full fitness and able to lift a glass with either hand.
Regards from the wet and windy north.

I hope said arm is mending after your spot of self restoration.

Thanks for being the first to offer help. As for S.H.M.B.O. moving heavy boxes? I would never be brave enough to suggest such a thing



I hope it is not too long before you are back to full fitness and able to lift a glass with either hand.

Regards from the wet and windy north.

Re: uniselector wanted
Oh bugger! ... I was looking forward to you popping down for a cup of coffee and me having my garage tidied up whilst you searched them out 

Re: Uniselector wanted



-
- uniselector type.PNG (87.99 KiB) Viewed 2590 times
Re: Uniselector wanted
Alright chap, I'll bite the bullet and go mining tomorrow (I promise) If you don't hear from me within a day or so please feel free to comment to somebody .... anybody where I was last headed.
BP
BP
Re: Uniselector wanted
I have returned, yet I feel my discoveries were not up to expectations.
I have two of these ...........
I have two of these ...........
Re: Uniselector wanted
Hi Jeremy
Thanks for taking the time to go out on a cold day to do some foraging on my behalf, it is most appreciated
They look quite useful little selectors and I could think of a few ways to use them, but sadly not on the machine I am trying to fix
I will just have to keep looking, I am sure the one I am after will turn up at some point and the machine will run once again
Best regards, see at Coventry..

Thanks for taking the time to go out on a cold day to do some foraging on my behalf, it is most appreciated

They look quite useful little selectors and I could think of a few ways to use them, but sadly not on the machine I am trying to fix


Best regards, see at Coventry..

Re: Uniselector wanted
Would it help if I painted them a different colour?
Not to worry, you know where they are when you need them.
Not to worry, you know where they are when you need them.
Who is online
Users browsing this forum: No registered users and 9 guests