Getting started
-
- Posts: 3
- Joined: Fri Jul 15, 2016 11:33 am
- Reaction score: 0
Getting started
Hi everyone!!
OK, I'm new to this but have always been intrigued by vintage slots. I am looking for a low cost working model that someone might be looking to offload that I could cut my teeth on.
Any advice and suggestions are appreciated.
James
OK, I'm new to this but have always been intrigued by vintage slots. I am looking for a low cost working model that someone might be looking to offload that I could cut my teeth on.
Any advice and suggestions are appreciated.
James
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Getting started
Happy hunting matey, I suggest you take a packed lunch with you.
Welcome to the forum though we need all the help we can get.
BP
ps .... acording to the rules of the site ..... strictly speaking .... you should have plonked this in The Market/Wanted However I guess your main message was to introduce yourself.
Welcome to the forum though we need all the help we can get.
BP
ps .... acording to the rules of the site ..... strictly speaking .... you should have plonked this in The Market/Wanted However I guess your main message was to introduce yourself.
Re: Getting started
Original working models are a bit thin on the ground at the moment.........however, nothing to stop you making your own if you can find a good automaton, build a cabinet to fit, paint it a nice colour with barge paint, make a coin slot, switch, relay, and a simple timer. Find or make a 'Working Model' name plate for the front and there you are!
-
- Posts: 3
- Joined: Fri Jul 15, 2016 11:33 am
- Reaction score: 0
Re: Getting started
I went out to look at a machine on Friday that I had been assured was in full working order. When I got there I discovered that the bit of the mechanism that controls the payout was missing. Bloody wasted journey! The seller "claimed he didn't realise that it was incomplete as he didn't know much about the machines", I found this a bit hard to believe as he had half a dozen of them dotted about the house.
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Getting started
Welcome to the best slot machine site in the world, and that is a fact! Whatever you need to know about slots we can... and will help
I think we need to know what it is you're actually looking for. As far as I know (there are better experts on working models on the forum than me) no working models have payouts. What exactly did you go to look at? Describe what you're looking for!
Could be you're using the wrong name for what you're looking for. This is a "working model" as far as we know it. Is it what you mean?
I think we need to know what it is you're actually looking for. As far as I know (there are better experts on working models on the forum than me) no working models have payouts. What exactly did you go to look at? Describe what you're looking for!
Could be you're using the wrong name for what you're looking for. This is a "working model" as far as we know it. Is it what you mean?
- Attachments
-
- working model 1.jpg (16.38 KiB) Viewed 3999 times
Re: Getting started
I don't think he actually means "a working model" I think he wants something that's "in working order" to start out with, that maybe just needs a little TLC. A bandit, wall machine etc.
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Getting started
Well spotted titanic. I bet that's what you meant, wasn't it James?
to the site.
to the site.
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Getting started
And there was me about to recommend Cara Delevingne.
Apparently she's one of the hardest working models.
Apparently she's one of the hardest working models.
-
- Posts: 3
- Joined: Fri Jul 15, 2016 11:33 am
- Reaction score: 0
Re: Getting started
Thanks for the comments.
Ideally what I am looking for is a vintage style one armed bandit. The type that would look great sat on a sideboard in my dining room (so not a wall mounted one). I like the look of the machines with cases that seem to be more metal than wood. I want something that accepts pre-decimal coins, maybe the big old pennies (1d).
Because I am totally new to this I want something that is fully working. Whilst I would like to get an understanding of how the machines are engineered and function, I feel it would be easier to have something that is fully operational when I buy it so that I can study a fully working mechanism.
I am based in Irlam, Manchester but would be happy to travel for the right machine though anything north of Birmingham would be easier.
James
Ideally what I am looking for is a vintage style one armed bandit. The type that would look great sat on a sideboard in my dining room (so not a wall mounted one). I like the look of the machines with cases that seem to be more metal than wood. I want something that accepts pre-decimal coins, maybe the big old pennies (1d).
Because I am totally new to this I want something that is fully working. Whilst I would like to get an understanding of how the machines are engineered and function, I feel it would be easier to have something that is fully operational when I buy it so that I can study a fully working mechanism.
I am based in Irlam, Manchester but would be happy to travel for the right machine though anything north of Birmingham would be easier.
James
Who is online
Users browsing this forum: hobbyman and 11 guests