Somebody knows... Maybe you?
User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Wonder Win and Place allwin machine

Postby mei-mei » Sun Apr 23, 2017 2:39 pm

Not a prob 13rebel, no need to beat yourself up about it. I would have tried the outside taper pins as it certainly would be less effort, if I was not so worried about getting the replacement pins to look neat. Being a bit of a sledge hammer person :smash: I thought it more prudent to try to repair the damage done inside where it matters a little less if the finish is not so perfect. MM

User avatar
pennymachines
Site Admin
Posts: 5136
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Wonder Win and Place allwin machine

Postby pennymachines » Sun Apr 23, 2017 3:09 pm

I've never had to remove the outer pins on handle or trigger, but Gameswat has encountered more allwins than I have. I still think, with the right tools, filing off the ends and following Widget's advice about supporting the shaft, you should have no problem getting those pins out. Seems like they need to be replaced anyway. If you follow Gameswat's suggestion and remove the outer pins, you'll probably want to replace them and file flush before rechroming, so they're hidden behind the chrome again - in which case, you'll still want to remove the other pins.

You do realize you may have caused an international incident by asking this question. !:STOP:!

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Wonder Win and Place allwin machine

Postby mei-mei » Sun Apr 23, 2017 4:10 pm

If I re-chrome after re-attaching the handles with pins, won't that mean I will never be able to get them off again? What international incident? Have I breached some protocol? '!'

User avatar
bryans fan
Posts: 654
Joined: Mon Feb 03, 2003 10:15 pm
Location: Somerset

Re: Wonder Win and Place allwin machine

Postby bryans fan » Sun Apr 23, 2017 5:22 pm

pennymachines wrote:
Sat Apr 22, 2017 9:58 pm
I may be wrong (I usually am)...
Now that sounds familiar! !NYAH!

User avatar
pennymachines
Site Admin
Posts: 5136
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Wonder Win and Place allwin machine

Postby pennymachines » Sun Apr 23, 2017 6:31 pm

mei-mei wrote:
Sun Apr 23, 2017 4:10 pm
If I re-chrome after re-attaching the handles with pins, won't that mean I will never be able to get them off again?
You shouldn't need to get them off, but it would be the same process - scrape off chrome and whack the pin.
mei-mei wrote:
Sun Apr 23, 2017 4:10 pm
Have I breached some protocol? '!'
No, but I may have (I usually do).

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Wonder Win and Place allwin machine

Postby mei-mei » Sun Apr 23, 2017 6:43 pm

Sometimes this site get really weird. !SHARKY!

User avatar
JC
Posts: 942
Joined: Sun Feb 19, 2006 10:38 pm
Location: Kent
Contact:

Re: Wonder Win and Place allwin machine

Postby JC » Sun Apr 23, 2017 8:07 pm

Bloody hell, four pages........ :NBG:

User avatar
john t peterson
Posts: 1050
Joined: Wed Dec 01, 2004 5:40 pm
Location: USA
Contact:

Re: Wonder Win and Place allwin machine

Postby john t peterson » Sun Apr 23, 2017 10:31 pm

Simple answer: Bigger hammer. Save the electrons!

J Peterson
Hammered in the USofA

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Wonder Win and Place allwin machine

Postby mei-mei » Mon Apr 24, 2017 5:46 am

Thanks J Peterson, def my kinda DIY! :smash:

User avatar
mei-mei
Posts: 221
Joined: Sat Dec 03, 2016 8:41 am

Re: Wonder Win and Place allwin machine

Postby mei-mei » Wed Apr 26, 2017 7:43 am

I hesitate to ask this question, having stirred up such a poop storm the last time, but here goes. Does anyone know where I can get 1/4 inch ply to replace the back board of this machine. Woodworm have had breakfast lunch and supper for years leaving it looking like Swiss cheese. All the DIY shops here are in metric and the closest in metric sticks out the back by a few mm. Really annoying. :dammit:


Who is online

Users browsing this forum: No registered users and 22 guests