New member! Hello everyone
-
- Posts: 2
- Joined: Sun Oct 01, 2017 10:09 am
- Reaction score: 0
New member! Hello everyone
Hello everyone. New member here just bought a penny machine for restoration. And need advice! Missing for parts and thought this is the best place to start. Missing the coin drop. And prize pull - not sure on the release system. Any help would be great.
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: New member! Hello everyone
Welcome to the forum, this is the right place for answers. I'm mostly bandits but the allwin boys will be along soon, can we have a clearer photo of the inside please?
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: New member! Hello everyone
Hello and welcome Sam. Was your machine one of the recent Double Your Win eBay barn finds pictured here? There's more information about these Philip Shefras allwins in this thread. This image from that thread may give you some indication of what you need to fabricate or source:
-
- Posts: 2
- Joined: Sun Oct 01, 2017 10:09 am
- Reaction score: 0
Re: New member! Hello everyone
Hello. Yes this was a recent eBay find. And it is the Double Your Win. It was a locked unit so I couldn’t see what the inside looked like. Unfortunately it’s missing parts. Which is never an easy task to take on. Thank you for the reference photo that’s a good start to look at what I need to try and find or fabricate.
Who is online
Users browsing this forum: No registered users and 12 guests