American, British, French or German? We want to know about it.
User avatar
daveslot
Posts: 426
Joined: Sat Dec 04, 2004 4:00 pm
Location: wilts/dorset/somerset border

Re: Caille / Clement & Whales Countertop disc machines

Postby daveslot » Fri Mar 17, 2017 12:35 pm

Very interesting, but it looks as though it started life in a different case.

User avatar
treefrog
Posts: 3354
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Caille / Clement & Whales Countertop disc machines

Postby treefrog » Fri Mar 17, 2017 2:42 pm

Yes, there appears to be frame castings with mounts at the bottom hanging freely, so I assume it was mounted like the normal Clement type machines. So what was the original machine?

Anyway, not mine, yet another lost soul losing it way deep in the Blue Ridge mountains somewhere loaded into containers for a pound or two. :#:

brianh
Posts: 126
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Caille Commercial

Postby brianh » Wed Nov 01, 2017 12:53 pm

Post moved & merged - Site Admin.

Saw this on the EH site. Not one I've seen before but looks intriguing. Does anyone have any experience of these and does it look fixable at first sight?
caille2.jpg
caille commercial.jpg

User avatar
pennymachines
Site Admin
Posts: 4744
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Caille / Clement & Whales Countertop disc machines

Postby pennymachines » Wed Nov 01, 2017 1:48 pm

I've moved and merged your query to this thread Brian, because it contains lots of info about these. First thing to note, although they're regularly called 'Caille Commercials', they were made in the UK by Clement & Whales.

You can compare the mechanism with the one pictured here. It appears to be complete. The 'cosmetics' - wormy case, lost veneer and chrome etc. are all fixable if you have the time, patience and a modicum of skill. You would want to try to cycle the mechanism to see if it's jammed. If it is, bid on the understanding that when unjammed other problems may become apparent. If it manages to spin and halt the disc, that's encouraging. If you can trigger a payout, it's !!THUMBSX2!!

User avatar
badpenny
Forum Moderator
Posts: 6011
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Caille / Clement & Whales Countertop disc machines

Postby badpenny » Wed Nov 01, 2017 2:45 pm

I've had a couple and the most common mess about mechanically that I found was the stops on the Star Reel having been braized shut, payout fingers bent and slides drilled and braized all to avoid the top payouts.

The nuisance is to get at the Star Reel you have to remove a lot of the mech from the back and then the dial on the front, so it's essential you get the dial back on exactly as it came off or the payouts are all to cock. Then when you reassemble everything you took off the back you'll need to recalibrate every part because you'll have unscrewed the adjustments in order to remove them.

User avatar
daveslot
Posts: 426
Joined: Sat Dec 04, 2004 4:00 pm
Location: wilts/dorset/somerset border

Re: Caille / Clement & Whales Countertop disc machines

Postby daveslot » Wed Nov 01, 2017 4:21 pm

The top and bottom of case might be salvageable but it's got ply sides and front, so they are going to need replacing. By the way, does anybody know what the coin-slot looking bit is for (it's just below the dial)?

User avatar
pennymachines
Site Admin
Posts: 4744
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Caille / Clement & Whales Countertop disc machines

Postby pennymachines » Wed Nov 01, 2017 5:58 pm

It does look pretty wormy, but maybe possible to stabilise and strengthen the ply by squirting epoxy filler into the holes, as it's going to be hidden by veneer. Of course the wooden back door is also missing (not hard to replicate) and the metal coin head backplate (not so easy).
daveslot wrote:
Wed Nov 01, 2017 4:21 pm
does anybody know what the coin-slot looking bit is for (it's just below the dial)?
I think it's just some sort of metal tag/label, similar to one pictured on the first page of this thread.

brianh
Posts: 126
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Re: Caille / Clement & Whales Countertop disc machines

Postby brianh » Wed Nov 01, 2017 11:22 pm

Thanks for all your help and advice again guys. !THUMBS! I'm not too worried about the case as I'm happyish to work on that and replace as necessary (brilliant recycled wood store nearby) . Am more concerned about the mechanics so I guess, pennymachines, your advice is sound - go to the auction and have a play with it, and try to cycle it first. If that fails I'm minded to walk away as it sounds (your comments noted badpenny) like it'll be beyond my limited skills :!?!: Just thought it would make an interesting change from the alwins I've been working on.

User avatar
pennymachines
Site Admin
Posts: 4744
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Caille / Clement & Whales Countertop disc machines

Postby pennymachines » Thu Nov 02, 2017 11:49 am

daveslot wrote:
Wed Nov 01, 2017 4:21 pm
does anybody know what the coin-slot looking bit is for (it's just below the dial)?
pennymachines wrote:
Wed Nov 01, 2017 5:58 pm
I think it's just some sort of metal tag/label, similar to one pictured on the first page of this thread.
Alternatively, I suppose it could be a skill stop button... :!?!:
CU.jpg
CU.jpg (22.52 KiB) Viewed 3600 times

scott christie
Posts: 2
Joined: Sat Jun 16, 2018 6:33 pm

Help

Postby scott christie » Sat Jun 16, 2018 6:38 pm

Topic merged - Site Admin.

Hello, my father has recently acquired a penny slot machine (picture attached). Can anyone tell me what it is, the year it was made etc?

Thanks
Scott
DD318944-0527-44CF-B54D-7B866431E975.jpg


Who is online

Users browsing this forum: No registered users and 5 guests