Somebody knows... Maybe you?
brianh
Posts: 120
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Oliver Whales lock

Postby brianh » Mon May 28, 2018 10:33 am

I imagine this subject has come up in the past but couldn't find it !PUZZLED! so would appreciate any advice please.

Does anyone have any idea where I can get a new lock for a Win-A-Chew Allwin I have started working on? All the locks I have found have wider barrels (if that's the right word?) . The lock on this one is relatively narrow as attached pic. As usual the keys are missing so unless I can find a locksmith that can make a key without the original (is that doable?) I guess easiest to replace it but I'm struggling to find a lock this small. Could fit a larger one but would be a shame to start cannibalising the machine, which is otherwise quite a tidy example, unless I really have to.

The only identification on the locks are that they are Yale. Approximate measurements are:

1 – diameter of barrel 14mm
2 – bottom and top length 37mm
3 – side length 44mm
4 - approx length of barrel 16mm

Many thanks once again for such a helpful forum!
win-a-chew1.jpg
lock3a.jpg

User avatar
badpenny
Forum Moderator
Posts: 5955
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Oliver Whales lock

Postby badpenny » Mon May 28, 2018 11:48 am

There may well be an easy answer, although I've rarely tracked it down.
You'll often read on here that a decent locksmith could manufacture a key, but my experience is they're just not interested or perhaps they're just not up to it.
I guess the labour charges would appear prohibitive to them.


Put a search onto eBay and then save it.

My interest is restoring machines back to their operative state and not when they came out of the factory. In the 60s at my Uncle's arcade in the Summer holidays I was forever drilling out locks because kids had been trying to open them with lolly sticks etc. This often involved reaming out the hole to take a bigger barrel.


At the Coventry Auction last year I bought a large bag of various cabinet locks, the small barrelled ones were the first used.

Good luck, keep searching, they're out there somewhere.

BP :cool:

aristomatic
Posts: 810
Joined: Thu Sep 10, 2009 8:13 pm

Re: Oliver Whales lock

Postby aristomatic » Mon May 28, 2018 12:37 pm

These guys are usually very helpful with vintage cabinet locks and keys,

Worth an email with pic and dimensions, just Google them

Keysplease

User avatar
ddstoys
Posts: 309
Joined: Sun May 12, 2013 4:48 am

Re: Oliver Whales lock

Postby ddstoys » Mon May 28, 2018 2:24 pm

Hard to tell from the photo if it’s the flat type key that I’m thinking it is - if you're handy I made a key to suit one of my games from a flat piece of steel and a dremel. It’s kind of funny that I used a piece of a modern pinball 1990s Williams machine as the base for my key. :HaHa:

If I remember I’ll take a photo of the dodgy looking thing.

User avatar
radiochrissie
Posts: 173
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men
Contact:

Re: Oliver Whales lock

Postby radiochrissie » Mon May 28, 2018 3:50 pm

I’ve got 2 of these, any good to you, These came off similar machines . With some careful drilling and a chisel they can look and fit like new. Barrel width is 22mm. :cool:
7A9A4FB0-4CF0-4750-A8A9-D9FE0A1844BCa.jpg
02B74A76-A453-4A6A-978A-38CC00FFE988a.jpg

brianh
Posts: 120
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Re: Oliver Whales lock

Postby brianh » Mon May 28, 2018 4:38 pm

Thanks for all your helpful replies, and your offer, radiochrissie. !THUMBS! I'll have a go at "keysplease" first and report back.
Brian

User avatar
pennymachines
Site Admin
Posts: 4640
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Oliver Whales lock

Postby pennymachines » Mon May 28, 2018 9:45 pm

There are several locksmiths listed in Archive/Services, including one I've used for this sort of work: Birmingham Master Locksmiths

brianh
Posts: 120
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Re: Oliver Whales lock

Postby brianh » Mon May 28, 2018 10:32 pm

Thanks for the info pennymachines. (and apols - that's the second time I should have checked the forum menu first :woops: Problem seems to be finding locks with smaller barrel diameter - having spent a good hour or 3 googling the catalogs of various lock suppliers no-one seems to do them small enough so I will give those in archive/services a go, thanks.

If all else fails I can always drill larger hole, chisel a bit out of the frame, and fit a different size lock (as per radiochrissie's comments and helpful offer) as I have done in the past on several machines, but it's becoming a pain having to do this every time so would be good if I can find a matching lock and it has become a mission to beat this problem!

User avatar
gameswat
Posts: 1702
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Oliver Whales lock

Postby gameswat » Tue May 29, 2018 6:48 am

eBay the hell out of that lock, it's not rare just an uncommon size. I've picked up lots of them this way over the years, though I can re-key myself so doesn't bother me with or without the key. Many sellers will put all the sizing info you need in the listing. But they use different kinds of terminology so you need to try various words, drawer lock, draw lock, cabinet lock etc. Or if you don't mind trawling like I do, I find it best to make the search as comprehensive as possible with basic search parameters like : yale lock vintage, yale lock antique, yale lock old, yale lock old brass, etc. Sometimes you'll find what you need in minutes, sometimes it takes a little longer.

brianh
Posts: 120
Joined: Sat Sep 24, 2016 3:51 pm
Location: Portishead (UK)

Re: Oliver Whales lock

Postby brianh » Tue May 29, 2018 9:31 am

Thanks for that, Gameswat - useful tips about terminology. Won't be giving up any time soon!


Who is online

Users browsing this forum: arrgee, badpenny, Bing [Bot] and 5 guests