Somebody knows... Maybe you?
deano67
Posts: 78
Joined: Wed Aug 30, 2017 9:28 am

Bally Gold Award payout problem

Postby deano67 » Sat Feb 23, 2019 10:28 am

Hi All,
Have a problem with my Bally Gold Award not paying out.
Solenoids and slides all OK when you manually trigger them but have two snipped wires and maybe another part missing at payout swipe?
Pics attached and anyone got any pics of the the same ?
Thanks in advance.
ebay-march-12-3060a.jpg
ebay-march-12-3059a.jpg
ebay-march-12-3058a.jpg
ebay-march-12-3057a.jpg
ebay-march-12-3056a.jpg

User avatar
brigham
Posts: 459
Joined: Tue Oct 31, 2017 3:37 pm

Re: HELP PLEASE ! BALLY PAYOUTS !

Postby brigham » Sat Feb 23, 2019 10:37 am

Don't worry about it.
I'll take it as it is.

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Bally payout problem.

Postby pennywise » Sat Feb 23, 2019 9:17 pm

Hi Deano got one in the workshop so if no one has posted one by morning will stick a pic up of mine, just cant get to it till tmrw.👍

deano67
Posts: 78
Joined: Wed Aug 30, 2017 9:28 am

Re: Bally payout problem.

Postby deano67 » Sat Feb 23, 2019 10:51 pm

Brill, thanks Pennywise, look forward to seeing the pic!

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Bally payout problem.

Postby pennywise » Sun Feb 24, 2019 10:19 am

Right Deano don't know if this is any good - maybe different coloured wiring, but this is mine. Let me know if you need any close ups of anywhere.
20190224_101350a.jpg
20190224_101511a.jpg

deano67
Posts: 78
Joined: Wed Aug 30, 2017 9:28 am

Re: Bally payout problem

Postby deano67 » Sun Feb 24, 2019 8:40 pm

Thanks but I still can't see where the red and orange wires should go. Could you do a pic of the whole side so I can compare with mine and see if maybe there is also something else missing.
Anyone else got any info?
Cheers.

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Bally payout problem

Postby pennywise » Mon Feb 25, 2019 11:41 am

More pics for you Deano. Sent you a pm. Hope this helps - if not, ring me and we can trace where they start and finish if easier.
20190225_113625a.jpg
20190225_113611a.jpg
20190225_113619a.jpg

deano67
Posts: 78
Joined: Wed Aug 30, 2017 9:28 am

Re: Bally payout problem

Postby deano67 » Mon Feb 25, 2019 1:24 pm

Thanks again, I still can't quite work out the wire route from the pics. What would be a good time to ring you please? Thanks.

User avatar
ddstoys
Posts: 309
Joined: Sun May 12, 2013 4:48 am

Re: Bally Gold Award payout problem

Postby ddstoys » Mon Feb 25, 2019 3:36 pm

Mine is a Bally multi coin but seems to have an extra pair of contacts roughly where your wires are cut.
615B6A6A-F648-4265-A438-A43B2E74286a.jpg
8C6F7FF0-E1E8-4043-B5CF-60F6D422D98a.jpg
AEC58D60-20DF-40F1-8F21-0844482B384a.jpg

deano67
Posts: 78
Joined: Wed Aug 30, 2017 9:28 am

Re: Bally Gold Award payout problem

Postby deano67 » Mon Feb 25, 2019 4:49 pm

Thanks, I think yours being a Multi Coin would be wired different to my Gold Award maybe ?
I can't see the extra contacts in your pics. They seem the same as mine?
Grateful for all the help.


Who is online

Users browsing this forum: No registered users and 4 guests