Cromptons Tip-Em-Off... HELP!

Somebody knows... Maybe you?
Post Reply
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Cromptons Tip-Em-Off... HELP!

Post by slotalot »

HELP!!! !!ANYONE!! !!PLEASE!!
I am working on a Crompton's TIP-EM-OFF wall machine, I found this machine under a gooseberry bush :D ... well it was on Badpenny's compost heap, if you really want to know !!DIG!! . as a result, the slugs and bugs, have buggered off with some of the bits, or to put it another way, some of the tippers. I have made a nice new case for the machine, but what I could do with now, is a photo of said tippers in situ, so I can work out which are missing and what goes where :!?!:, Then I can try and re-make the missing parts and finish the machine. I will post a photo once it is finished.
Any help will be welcomed !WORSHIPFULL!
Attachments
compton.jpg
User avatar
badpenny
Forum Moderator
Posts: 7212
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Cromptons Tip-Em-Off... HELP!

Post by badpenny »

Yes I'm still giving them away ..... !PUZZLED!
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Cromptons Tip-Em-Off... HELP!

Post by pennymachines »

Hi Stuart - in case you hadn't spotted it, you might get some idea about the arrangement of the tippers from the enlarged picture of a Crompton Tip-Em-Off in my Arena article on Portable Penny Pushers - Page 4. It's the same scheme as the Jamieson See-Saw, next to it.

Looking at your picture, I think you might have examples of all the required shapes. Basically, they're arranged so there are no visible gaps when the tippers are un-tilted. The symmetrical "V" (in the top of your picture) sits atop the apex of the "Tip-Em-Off" sign. The other end of each counterweighted piece is a horizontal coin-catching flap, whereas the un-weighted bits are the gap fillers. I don't have one to play with at present, I'm afraid, but maybe you could puzzle it out trial-and-error by making some cardboard copies of the bits you have.
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

Hi Dave :D ,
Thanks for that, I thought I had seen a photo on the forum, never thought to look in the Arena :dammit: ..
armed with this knowledge, I will nip back down to the shed, and see if the penny drops.. !!CHEERS!!
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

PennyMachines wrote: whereas the un-weighted bits are the gap fillers.
:D Thanks for the above words of wisdom, as soon as I read them it all made sense !THUMBS! , and you were right in saying I had examples of all the required shapes. I have been and had some stainless sheet cut, and have now remade all the missing bits !!YIPPEE!!
And I would also like to thank Badpenny for sending all his "rubbish" up to Yorkshire for recycling, and helping to keep me out from under the wife's feet ^{}^ . I think this is going to be machine No2 in my grandson's collection, so I will have to find room for it low down on the wall so he can reach it :tarah:
Attachments
PB250058.JPG
PB250060.JPG
PB250063.JPG
User avatar
JC
Posts: 1082
Joined: Sun Feb 19, 2006 10:38 pm
Reaction score: 9
Location: Kent
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by JC »

Nice job, Stuart !THUMBS!

And you did it all in 4 days? Perhaps you could knock-up a few for me? I'll send you a list.

Jerry !WORSHIPFULL!
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

Hi Jerry, glad you like it :D ...it took me about 8 days on and off to work through it, but it's been stuck under my bench for for the last 4 months. I just needed to get it done and make some room, in case I come home from the auction with an other car load of waifs and strays !!BRRRMM!! If not you will just have to send me your list...lol !!CHEERS!!
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Cromptons Tip-Em-Off... HELP!

Post by pennymachines »

Fantastic work again Stuart. From compost to showroom in four months - amazing! !!GOODJOB!!
User avatar
badpenny
Forum Moderator
Posts: 7212
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Cromptons Tip-Em-Off... HELP!

Post by badpenny »

How dare you Mr P there is no compost in my garden I'll have you know .....Doggy doo-doos, junk, Harley Davidson, specialist rubbish? Without doubt, but compost? ..... Definitely not dirtdog
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Cromptons Tip-Em-Off... HELP!

Post by treefrog »

Hi Stuart,

Nice job, I have a similar machine, with one of the weighted tippers missing. As a matter of interest, where did you source the stainless steel from with the right thickness. I may need to remake the weight out of either large nuts or possibly lead. Also what did you make the case out of?

Many thanks for your help.
raj
Posts: 642
Joined: Tue Apr 29, 2008 7:19 am
Reaction score: 1

Re: Cromptons Tip-Em-Off... HELP!

Post by raj »

I acquired my stainless from the wife's microwave oven, which I persuaded her was past its best !
Another good source is the local dumpit site: park up near the metal bank & hijack the incoming goodies before they hit the skip, avoiding the day-glo security thugs and banks of cameras. I have rescued a few sheets of zinc-plated steel from the back of washing machines which are great for rebuilding rusty Clock parts etc.
Try your local scrapyard, they never turn down folding money for anything!
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

Hi tree-frog, :D , I am lucky to know the owner of a stainless steel fabrication company. I was an apprentice with him over 35 years ago, so I just pop in and raid his offcuts bin.

I made the missing weights out of a stack of 5 or 6 halfpennies with a copper rivet through the middle. They work out at just about the same size and weight as the originals. I used halfpennies because I have 100s of them and no halfpenny machines :!?!: .

As for the case, I managed to rescue the original back and the original front door, the rest I made from 18mm MDF, and finished it with a paint splatter finish and a clear top coat Why MDF?..... because I had lots of it at the time. I also added my own top flash just to finish it off.

And as raj was saying, you could try the local tip, sorry "Recycle Center", where I have been scrounging for the last 40 years, but since the Spaniards took over last year, they have made it a hanging offense to remove anything from the site, which kind of goes against there prime directive of Recycling??? :dammit: :dammit: :dammit:
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Cromptons Tip-Em-Off... HELP!

Post by treefrog »

Thanks,

I did wonder about the top flash, as I had not seen this on any others, it looks good and improves from the plain boxey finish !!THUMBSX2!!
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

Thanks, glad you like it :cool:
check your emails !!JUNK!!
Regards Stuart. :tarah:
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Cromptons Tip-Em-Off... HELP!

Post by treefrog »

Stuart, many thanks for the metal strip and advice, this is absolutely perfect, you are a star. !!THUMBSX2!! !!THUMBSX2!! !!THUMBSX2!!
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by slotalot »

Glad I could :D help.
User avatar
JC
Posts: 1082
Joined: Sun Feb 19, 2006 10:38 pm
Reaction score: 9
Location: Kent
Contact:

Tip em Off photograph

Post by JC »

Topic moved & merged - Site Admin.

Does anyone have a Cromptons Tip em Off that they could photograph for me please? I need a high res picture, as I want to have the graphics printed. I'll be happy to post in Resources once I've prepared ready for printing.

Thanks |/XX\|

Jerry
User avatar
slotalot
Posts: 2051
Joined: Mon Apr 21, 2008 1:53 pm
Reaction score: 10
Location: Halifax West Yorkshire
Contact:

Re: Tip em Off photograph

Post by slotalot »

Hi Jerry, just found this on my hard drive, not sure if it is good enough to print from !PUZZLED! ..... but it might help :!?!:
you can flip the triangle photo for r/h side image.
Attachments
tip2.jpg
tip1.jpg
User avatar
JC
Posts: 1082
Joined: Sun Feb 19, 2006 10:38 pm
Reaction score: 9
Location: Kent
Contact:

Re: Cromptons Tip-Em-Off... HELP!

Post by JC »

Thanks Stuart, yes that's what I need - but much bigger. If anyone has a machine that they could photo those two pieces of artwork for me, it would be much appreciated.
Post Reply

Who is online

Users browsing this forum: Semrush [Bot] and 26 guests