Taxi!!!!
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Taxi!!!!
This is nothing to do with a slot …. sorry, but the other forum I frequent (tickle_my_arse_with_a_feather.com) will be even less interested …. and I want to tell somebody.
However it is a machine and to do with taking money.
I came across a 60/70s London Black Cab taxi meter a while back and added it to the pile of treasures I lumber around the country with me because one day it'll be handy.
So, as I only had a dozen or so project bandits and wall machines awaiting my attention, and was desperately looking for something to do I dug it out.
It consisted of two parts. The meter itself which clocks up the money, miles, trips etc. and the light unit which shows For Hire and Available. These meters charge by the mile and by time. The time element is clockwork and the spring can be wound up from a gert great key on the side. The mileage works by a cable attached to the same drive as the mileometer/speedo. Of course that was missing.
The bulbs in the meter and light unit were blown and of the filament/festoon type.
With the intention of making a working meter/lamp out of it, I …….
Overhauled the meter and freed it up.
Replaced the bulbs with 12v dc led type, and rewired.
Fitted a 12v dc motor with a 3rpm gearbox to the mileage drive input on a separate fused circuit to the lights.
Connected a 240v ac - 12v dc 5amp transformer.
Ascertaining it was a viable project I went for it.
I mounted it on a varnished lump of wood.
Mounted a taxi sign over the top.
Hid the wiring at the back behind a coin holder, dosh and a book of receipts.
Absolutely no expense was used, and only the best tinsel included for wiring.
You can have just the lights on and/or the money clocking up.
So far I've charged myself £27.63 and haven't moved a foot, no tip for me then.
It was only a one off and I have no intention of converting any amusement machines into lamps, however …… I reckon a Bryans Bumper might look more interesting.
BP
However it is a machine and to do with taking money.
I came across a 60/70s London Black Cab taxi meter a while back and added it to the pile of treasures I lumber around the country with me because one day it'll be handy.
So, as I only had a dozen or so project bandits and wall machines awaiting my attention, and was desperately looking for something to do I dug it out.
It consisted of two parts. The meter itself which clocks up the money, miles, trips etc. and the light unit which shows For Hire and Available. These meters charge by the mile and by time. The time element is clockwork and the spring can be wound up from a gert great key on the side. The mileage works by a cable attached to the same drive as the mileometer/speedo. Of course that was missing.
The bulbs in the meter and light unit were blown and of the filament/festoon type.
With the intention of making a working meter/lamp out of it, I …….
Overhauled the meter and freed it up.
Replaced the bulbs with 12v dc led type, and rewired.
Fitted a 12v dc motor with a 3rpm gearbox to the mileage drive input on a separate fused circuit to the lights.
Connected a 240v ac - 12v dc 5amp transformer.
Ascertaining it was a viable project I went for it.
I mounted it on a varnished lump of wood.
Mounted a taxi sign over the top.
Hid the wiring at the back behind a coin holder, dosh and a book of receipts.
Absolutely no expense was used, and only the best tinsel included for wiring.
You can have just the lights on and/or the money clocking up.
So far I've charged myself £27.63 and haven't moved a foot, no tip for me then.
It was only a one off and I have no intention of converting any amusement machines into lamps, however …… I reckon a Bryans Bumper might look more interesting.
BP
- john t peterson
- Posts: 1336
- Joined: Wed Dec 01, 2004 5:40 pm
- Reaction score: 7
- Location: USA
Re: Taxi!!!!
Does anyone need any more proof that we're a bit balmy?
TAXI !!
J Peterson
Uberly useless in America
TAXI !!
J Peterson
Uberly useless in America
- bryans fan
- Posts: 823
- Joined: Mon Feb 03, 2003 10:15 pm
- Reaction score: 7
- Location: Somerset
- radiochrissie
- Posts: 212
- Joined: Sun Oct 10, 2010 7:03 pm
- Reaction score: 0
- Location: The Iron Men
Re: Taxi!!!!
BP, have you tried turning off the Taxi light, leaving the 'for hire' light on, and placing the said object in a window at the front of your house.
At least that way, you could make use of the fare charge counter.
........just a thought
At least that way, you could make use of the fare charge counter.
........just a thought
- john t peterson
- Posts: 1336
- Joined: Wed Dec 01, 2004 5:40 pm
- Reaction score: 7
- Location: USA
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Taxi!!!!
the thought of BP sitting semi naked in a lighted window has put me off my dinner
The fact that these meters also have an "EXTRAS" selector also makes the mind boggle
The fact that these meters also have an "EXTRAS" selector also makes the mind boggle
- john t peterson
- Posts: 1336
- Joined: Wed Dec 01, 2004 5:40 pm
- Reaction score: 7
- Location: USA
Re: Taxi!!!!
Are you referring to my wife as a "BAG??"
Didn't you mean "HAG???"
J Peterson
Running scared in America
Didn't you mean "HAG???"
J Peterson
Running scared in America
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Taxi!!!!
Ill tell her you said that!!
you just take care none of that 220v power in those UK machines doesn't "leak" onto the coin entry one day
you just take care none of that 220v power in those UK machines doesn't "leak" onto the coin entry one day
Taxi meter
Topic moved & merged - Site Admin.
This prob isn’t the right forum for this but I know you lot are into all sorts and to be honest I’m not sure where else to ask so forgive me…..
I’ve just acquired this Halda taxi meter. A cute little thing and seems to be working and ticking and the meter progresses with time. etc. There are some cut wires which will need replacing. I’d love to see it operational but being that I don’t own a taxi I’m seeking some info on how these were wired with a view to building some electronics to provide the pulses to make it work. I’ve searched online and can find nothing in terms of old manuals, info, or anything at all really.
Does anyone here know anything useful or of other forums where I might find stuff?
Thanks
This prob isn’t the right forum for this but I know you lot are into all sorts and to be honest I’m not sure where else to ask so forgive me…..
I’ve just acquired this Halda taxi meter. A cute little thing and seems to be working and ticking and the meter progresses with time. etc. There are some cut wires which will need replacing. I’d love to see it operational but being that I don’t own a taxi I’m seeking some info on how these were wired with a view to building some electronics to provide the pulses to make it work. I’ve searched online and can find nothing in terms of old manuals, info, or anything at all really.
Does anyone here know anything useful or of other forums where I might find stuff?
Thanks
Re: Taxi meter
Actually on second look I believe it’s a physical connection in the base. I guess I need a motor to drive that. Would be interesting to know how many turns/speed needed to make a difference…. If anyone knows approximate gearing etc.
-
- Posts: 1130
- Joined: Thu Sep 10, 2009 8:13 pm
- Reaction score: 4
Re: Taxi meter
I've looked at these in the past.
They are great items, take up not a lot of space too....!
They are great items, take up not a lot of space too....!
Re: Taxi meter
Geoff, I think I have found the unit to physically connect the base to, it is the far right hand rectangular aperture on the metal trunk in the photos below - good luck with it, you will have limited time once you start.geofflove wrote:I believe it’s a physical connection in the base
- Attachments
-
- defuse.jpeg (106.11 KiB) Viewed 1656 times
-
- defuse 1.jpeg (68.7 KiB) Viewed 1656 times
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Taxi meter
I too found the insert for the mechanical drive, and by twiddling it with my fingers I realised it was a light drive that turned easily.
Through eBay I purchased a 12 volt dc motor with a step down gearbox attached, it gave 3rpm at the output.
That was 4 years ago, and it's still trundling along merrily.
BP
Through eBay I purchased a 12 volt dc motor with a step down gearbox attached, it gave 3rpm at the output.
That was 4 years ago, and it's still trundling along merrily.
BP
Re: Taxi meter
Well if I don’t succeed I think you’ll all know about it according to the pic above!
Yes I was looking at synchronous motors on eBay. Quite cheap and hopefully powerful enough. I tried with an electric screwdriver and it ticks over very nicely. I wasn’t sure the 4 rpm would be fast enough but obvs works for you.
I had a look for a roof light for a London taxi but can’t find any apart from a £219 new one! Will have to think of something else.
I’ll prob end up doing similar to you. Be nice to see it ticking again!
Cheers for suggestions.
Yes I was looking at synchronous motors on eBay. Quite cheap and hopefully powerful enough. I tried with an electric screwdriver and it ticks over very nicely. I wasn’t sure the 4 rpm would be fast enough but obvs works for you.
I had a look for a roof light for a London taxi but can’t find any apart from a £219 new one! Will have to think of something else.
I’ll prob end up doing similar to you. Be nice to see it ticking again!
Cheers for suggestions.
Who is online
Users browsing this forum: No registered users and 11 guests