Bryans 1930s Payramid jackpot
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Bryans 1930s Payramid jackpot
Hi Everyone,
After a great day at the Coundon auction, I'm still on my quest for a few pre war machines! I've so far only managed to buy a clown catcher and have posted a request for a replacement base but unfortunately haven't had any response yet!. Thanks for the heads up on restoration by the way. I eventually simply degreased the wood which left the stain intact and then re-polished. It came out much better than I would have thought and although the 'spam' tin stain to the top is still evident... it's much better than before and the machine still retains its original patina.
I have also just been offered a rather nice early Bryan's Payramid (perhaps similar to that in the auction) but as you will see by the picture, it would seem the payout casing etc. is missing. Much as I fancy/want this machine, I see no point as I'm sure it would be unlikely the parts are available (unless someone can advise otherwise). Don't need another garage filler!
After a great day at the Coundon auction, I'm still on my quest for a few pre war machines! I've so far only managed to buy a clown catcher and have posted a request for a replacement base but unfortunately haven't had any response yet!. Thanks for the heads up on restoration by the way. I eventually simply degreased the wood which left the stain intact and then re-polished. It came out much better than I would have thought and although the 'spam' tin stain to the top is still evident... it's much better than before and the machine still retains its original patina.
I have also just been offered a rather nice early Bryan's Payramid (perhaps similar to that in the auction) but as you will see by the picture, it would seem the payout casing etc. is missing. Much as I fancy/want this machine, I see no point as I'm sure it would be unlikely the parts are available (unless someone can advise otherwise). Don't need another garage filler!
- bryans fan
- Posts: 822
- Joined: Mon Feb 03, 2003 10:15 pm
- Reaction score: 7
- Location: Somerset
Re: Bryan's Payramid..What a shame!
I think that if the price is reasonable you should not hesitate and buy it! Its not missing a great deal, we are all here to help. Also there is a very good patent drawing to help.
It is a great machine and surely everyone wants a Payramid in their collection.
I do hope that you don`t get PM`d with people wanting it!
It is a great machine and surely everyone wants a Payramid in their collection.
I do hope that you don`t get PM`d with people wanting it!
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Bryan's Payramid..What a shame!
I second that. If the asking price is too high, fair enough, but make sure you don't look a gift horse in the mouth. These are worth going the extra mile for and I'm sure the work required is not beyond your capabilities.
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Re: Bryan's Payramid..What a shame!
Hi guys, I've looked at the patent and think I understand the principle. Pictures on Mr. Wrights site show the 'casing' around the tube and slide, so I've probably concluded that it's more complicated than it really is! The easy question to ask is whether other Bryan's machines use a similar payout slide for adaption in some way? I ask this as I'm more used to bandit mechs.
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Re: Bryan's Payramid... What a shame!
A deal was done on the payramid and should arrive next week!. So I may as well continue the thread early by asking if anyone has any spare 'payout' bits for this that they will sell? (I have also placed in the 'Market'). Picture below show one complete as oppose to the one above.
- Attachments
-
- paymech1.jpg (21.68 KiB) Viewed 5769 times
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Re: Bryan's Payramid... What a shame!
It arrived yesterday!! I am very pleased with the machine so far. It works very well, only needing a few minor adjustments.
If anyone has one of these, I would appreciate a couple of close-ups of the payout situation. My jackpot is complete but would also like to see how it is 'fed' presumably from the top of the slide tube?
If anyone has one of these, I would appreciate a couple of close-ups of the payout situation. My jackpot is complete but would also like to see how it is 'fed' presumably from the top of the slide tube?
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Bryan's Payramid... What a shame!
Congratulations on your acquisition! I'm sure you won't regret it but, as one of the folk who chivvied you into it, perhaps I should offer some support.
The payout unit, as far as I'm aware, is unique to this machine. The hopper is sand-cast and soldered to some tin-work, Attached by bolts to the tin-work is a bent metal guide with directs overflow to the jackpot. Attached by threaded screws to the base of the hopper is a sprung plate, against which the two-penny slide runs. The slide itself (not shown) is an angled flat bar which would not be hard to fabricate, but I can't pretend the whole task is trivial. If you can make it sometime to my neck of the woods (Birmingham), I would be willing to assist.
The payout unit, as far as I'm aware, is unique to this machine. The hopper is sand-cast and soldered to some tin-work, Attached by bolts to the tin-work is a bent metal guide with directs overflow to the jackpot. Attached by threaded screws to the base of the hopper is a sprung plate, against which the two-penny slide runs. The slide itself (not shown) is an angled flat bar which would not be hard to fabricate, but I can't pretend the whole task is trivial. If you can make it sometime to my neck of the woods (Birmingham), I would be willing to assist.
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Re: Bryan's Payramid... What a shame!
Superb!... Thanks for the pics. The patent is good but the pics certainly clear up a couple of niggles. I have some bits that will be useful but could do with some form of base or slide to get up and running. Have contacted a few people but the only promising one was a chap who apparently had sold a couple of part machines pre Christmas. Just my luck!. I'Il drop in when passing sunny brum. (Unless the buyer visits this site!.)
-
- Posts: 65
- Joined: Sat Nov 19, 2011 6:03 pm
- Reaction score: 0
Re: Bryan's Payramid... What a shame!
Crude but it works!. Made the outer casing and 'jackpot guide' as well. Just got to put it together now!
Re: Bryan's Payramid... What a shame!
I'm jealous, that looks like a great find!
I'd love to run across something like that in the States.
I'd love to run across something like that in the States.
Payramid 1930s version jackpot won't reset
Topic moved & merged - Site Admin.
Yesterday I managed to win the Jackpot on my 1930s version of the Bryans Payramid (Showman).
When I put another penny in the slot, the jackpot trap door is still opening and closing when the handle is turned. For some reason it doesn't want to reset itself
It's the first time the jackpot has been activated since I've had the machine, so I'm not sure if this problem has always been there.
Anybody any ideas what could be causing this problem.
Yesterday I managed to win the Jackpot on my 1930s version of the Bryans Payramid (Showman).
When I put another penny in the slot, the jackpot trap door is still opening and closing when the handle is turned. For some reason it doesn't want to reset itself
It's the first time the jackpot has been activated since I've had the machine, so I'm not sure if this problem has always been there.
Anybody any ideas what could be causing this problem.
Re: Payramid 1930s version jackpot won't reset
Thanks got it sorted.
I wonder what the record is for the amount of wins after the jackpot is paid out, I managed the 8 balls plus another 1 ball -
8 balls = 8 pennies plus jackpot of approx 50 pennies
plus 1 ball = 2 pennies
I wonder what the record is for the amount of wins after the jackpot is paid out, I managed the 8 balls plus another 1 ball -
8 balls = 8 pennies plus jackpot of approx 50 pennies
plus 1 ball = 2 pennies
-
- Posts: 16
- Joined: Sat Feb 16, 2019 8:17 am
- Reaction score: 0
Re: Payramid 1930s version jackpot won't reset
I've got the mk1 Payramid and the jackpot won't pay out; different mechanism to the one shown above; anybody got any hints please? Cheers chaps.
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Bryan's 1930s Payramid jackpot
I've merged your query with an earlier topic showing the '30s Payramid jackpot.
You'll find detailed drawings and description of how the jackpot works in the Archive/Patents: GB431216
You'll find detailed drawings and description of how the jackpot works in the Archive/Patents: GB431216
Who is online
Users browsing this forum: No registered users and 21 guests