Somebody knows... Maybe you?
malcymal
Posts: 784
Joined: Tue Feb 19, 2008 11:58 am
Location: Bognor Regis, West Sussex, England

Re: Aristocrat Clubmaster

Postby malcymal » Thu May 23, 2019 9:27 am

Be influenced by what moves you - if you want a light get one. A small battery LED light with sticky pads and hide away inside over reels, they last for ages on batteries. I've got a Jubilee mk1, and no, they didn't come with lights, but I don't care as it's flipping mine and I installed an old pygmy lamp. I like lights and it looks a lot nicer on its stand at night and can still be played as reels illuminated.

User avatar
special when lit
Posts: 212
Joined: Fri Dec 17, 2004 4:46 pm
Location: Derby

Re: Aristocrat Clubmaster

Postby special when lit » Thu May 23, 2019 3:05 pm

Looks great. I painted the red in on the badges on mine, I think it looks better.
Anyone know what the little round window is, on the side? Thought it might be for a play meter or something.
th_IMGP1241-1[1].jpg
th_IMGP1241-1[1].jpg (4.41 KiB) Viewed 1461 times
IMGP1241a.jpg

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Aristocrat Clubmaster

Postby pennywise » Thu May 23, 2019 6:36 pm

Oh yeah, defo going to paint - they look great, really makes the middle stand out more.
The window on the side is to read the play meter. I have the counter on the side of my mech, that was one of the reasons for putting a light in so you could see the counter and mech.
Going to try with the battery light as it will only light the reels, nothing more to light up on these.

User avatar
hutto
Posts: 127
Joined: Sat Sep 01, 2012 7:30 pm

Re: Aristocrat Clubmaster

Postby hutto » Fri May 24, 2019 2:57 pm

The window on the side is a jackpot counter - mine still had this attached. :lol:

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Aristocrat Clubmaster

Postby pennywise » Sat May 25, 2019 8:26 pm

Hi, is there any chance one of you guys could post some pictures of the coin mech, as mine seems to have the arm missing that pushes the coin down the tube.
In my pics I think there should be a rod that moves down the bandanna-shaped hole that hits the coin down. Need to find out if I could make one if I can find some pictures on how it is attached.
Cheer guys - hope a few of you have these machines.
20190524_161456a.jpg
20190524_161522a.jpg

User avatar
treefrog
Posts: 3282
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Clubmaster

Postby treefrog » Sat May 25, 2019 10:16 pm

The cover is not on, so we cannot see the linkage that should be there that is operated from the operating arm.....do you have the levers and links, see below
32061DFF-9770-4631-824B-A8B07BE3D290.jpeg

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Aristocrat Clubmaster

Postby pennywise » Sun May 26, 2019 6:08 am

treefrog wrote:
Sat May 25, 2019 10:16 pm
The cover is not on, so we cannot see the linkage that should be there that is operated from the operating arm.....do you have the levers and links, see below
Hi tf, no mate that is what I need to see, I've got no linkages at all so I need to mock something up if I can see what is missing.
That's the only things missing and I'm pretty sure that no one will have these as spares so looks like I'm going to have to bodge something up. It's looking where and what they are connected to. Whould appreciate some pics of the back and side to show me how it's connected to the arm please. :D !THUMBS!
I presume on the pic I've put up this is where it is connected to the arm. Would like to do it right and sure I could knock something up to fit.
20190513_144945a.jpg

User avatar
treefrog
Posts: 3282
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Clubmaster

Postby treefrog » Sun May 26, 2019 3:08 pm

I may have the parts, but would need to check as these only existed on early Aristocrats as they changed the coin acceptor assembly after the Sheerlines.

User avatar
treefrog
Posts: 3282
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Aristocrat Clubmaster

Postby treefrog » Tue Jun 11, 2019 10:05 pm

I am getting errors trying to send a private email to you and cannot send picture in messages.

So I have an arm as mentioned, that should work, off a Sheerline.....if you choose you can cut rounded like original
3292B1B6-645D-4A6B-9E3D-3566A3DE4E0E.jpeg
BC0DC7D0-165E-466A-AC5F-8170F9CBEF4A.jpeg
I have no spares coin engagement levers for Clubmasters, but the Sheerline has a similar longer version with the correct attachment for above arm. You could cut shorter and bend as indicated if you have a good clamp....I would bend while long, then cut and maybe heat before hand......
7DB7182B-7229-48D0-80BC-CF86C764965D.jpeg
F2D08462-BFD2-460E-9E53-7F7196E3B79B.jpeg
I do not have the very large shoulder bolt that holds this in place, so if you cannot find one, maybe a appropriate fitting bolt with a shim in place may do the job...
D21071AC-26FC-46D3-BC27-D5CB8EFC0AFA.jpeg
Let me know

Cheers

Tom

User avatar
pennywise
Posts: 112
Joined: Sun Aug 19, 2018 6:45 pm
Location: West yorkshire

Re: Aristocrat Clubmaster

Postby pennywise » Wed Jun 12, 2019 12:30 pm

Cheers Tom,
I have a couple of shoulder bolts or could knock something up to fit and a really big thanks for digging through your treasure to find this stuff for me, really do appreciate it mate.
I will send you a PM with my address if I can and let me know how much including postage and I will pay you before you send it. Can't wait to get the Clubmaster up and running because the wife will let me bring it in the house then instead of calling it all junk. 😂 Like I said to her, it's my junk that helps pay the bills.

All done painting the badges and it looks so much better.
20190526_185412a.jpg


Who is online

Users browsing this forum: No registered users and 2 guests