Discuss our on-site auctions and other slot machine auctions.
User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Wed Mar 04, 2015 2:45 pm

John T. Peterson wrote:It's back again, the original one that started this thread: http://www.ebay.com/itm/111598460413?_t ... EBIDX%3AIT
The USA is in fact a small world after all - another one of these just sold there and with identical park paint to the previous one John spotted a couple of times. http://www.ebay.com/itm/Penny-arcade-pe ... 7675.l2557
$_57 (4).JPG
$_12 (5).JPG

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Wed Mar 04, 2015 2:56 pm

And interestingly I just found I'd saved both images of the interior door instruction papers to replace in my own machine. Note both have had the Bolland name and address torn off exactly the same. I'm sure both these machines came from the same operator before being shipped to the USA in the 1970s.
$_112.jpg
$_12 (4).jpg

User avatar
john t peterson
Posts: 993
Joined: Wed Dec 01, 2004 5:40 pm
Location: USA
Contact:

Re: Bolland Auto Stereoscope

Postby john t peterson » Wed Mar 04, 2015 3:37 pm

Good detective work, Gameswat. -/00\-
I remain in semi-constant amazement at the number of British amusement machines that landed here. At some point, we Yanks need to organize a museum display of British coin-op. Then you lads can come to the US to see your mechanical heritage. For the time being, I'm offering my garage so all who feel the desire to contribute should contact me immediately.

J Peterson
American curator of British history !SMARTY!

User avatar
pennymachines
Site Admin
Posts: 4761
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Bolland Auto Stereoscope

Postby pennymachines » Wed Mar 04, 2015 4:28 pm

Let me guess, Gameswat - you detected the model of typewriter and sourced one at your local car boot sale to hammer out an authentic looking reproduction. :D
Clearly they were individually hand typed because the wording varies slightly.

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Wed Mar 04, 2015 4:33 pm

I do keep a vintage typewriter around for just such occasions. I once tried using computer fonts to replicate typewritering - it took forever and sucked!!

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Thu May 30, 2019 10:48 am

So I'm thinking that the Auto Stereo never had a tin or wooden cash-box, but can anybody confirm if they do have what they think is an original? The typed paper instruction sheet glued inside some of the doors states "Battery is inside money box". The locking money box does not lend itself to really taking a cash-box because the coins enter absolutely against the side of the wood, so there would need to be a funnel to direct the coins from falling down between the cashbox and cabinet. The floor wood directly below the coin entry on my machine does have a small depression from coins having slowly beaten into it. Obviously once a few coins build up this would stop happening though. Also there are two wooden strips glued and nailed to either side of the door aperture to stop the door pushing inwards, and these stop you using a tin cash-box that's a tight fit inside the money box. Though I have tried using a smaller one that was a tight fit with the battery to push against the coin entry point wall. But I always had Pennies that were jammed beside the cashbox and made it hard to get out. There are a few scratches on the right hand side wood caused by my cashbox going in and out over the last 15 years, but no other signs of anything else. Cheers.
auto stereo money box door.jpg
auto stereo money box.jpg
auto stereo money box entry.jpg

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Fri May 31, 2019 6:20 pm

Just been remaking the printed and typed instruction sheet that was glued inside the door. I've only ever seen the two examples as shown that turned up on eBay machines in the US, both with the Bolland name and address scratched off. Does anybody happen to have this surviving in their machine they could please take a photo of? Looks like they might have used a shipping label as there is some printed words they typed over. "Per" & "Date" along the bottom typed line and I think "FROM" at the top of the second box above scratched out address.
$_112.jpg
$_12 (4).jpg

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Sun Jun 02, 2019 9:32 pm

So after looking at Bolland's letter heads and adverts for cues I based the missing name graphics on the Auto Stereo advert script since this is most likely the same one they had used. I didn't bother with the small "Per" and "Date" (as mentioned above), or the "From" since that was just a guess. I'll add the basic graphic to resources minus the typed in wording since each one should be hand typed and unique. And will also make anybody that wants one have to get their hands dirty since they're getting off easy compared to me! I obviously need a new ribbon as pretty light compared to the others.
bolland label_1.jpg

User avatar
gameswat
Posts: 1744
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Bolland Auto Stereoscope

Postby gameswat » Fri Jun 07, 2019 2:59 pm

OK, so after 15 years I've only just got the machine to where I'm finally happy with the restoration..............and it's sold. Oh well. Took a lot of attempts and layering different stains etc to eventually match the newer base wood with the old cabinet veneer. Made a lot harder than normal as I was trying to age the limed finish on top of the oak, and not straight onto the highly absorbent wood that I normally have to work with. I can't remember having to go to so much effort to achieve a cohesive result as this. Over time I would deliberately bash the broom and mop into the feet to try and build up some patina. Last week I got serious though and attacked them in my workshop with various shaped objects laying around, then some dark staining. When I'd purchased the machine it had nearly all new chrome on it, except the handle. I left the new plating alone until now as always better things to do, but was never very happy so took it all off and scuffed the hell out of it with light sandpapers and wire brushes. Has now blended the whole machine together quite nicely.

You'll notice the girl changed on the mint condition marquee poster. The glued on photo was in perfect cond, but the girl looked a little too young. So I scanned a better example from one of the cards in the machine and printed in sepia tone, then attached over the original with tiny spots of gum based glue that is easily removable.
auto stereo bob.jpg
As purchased.
bolland auto 1.jpg
bolland auto 4.jpg
bolland auto 2.jpg
bolland auto 6.jpg

User avatar
bryans fan
Posts: 582
Joined: Mon Feb 03, 2003 10:15 pm
Location: Somerset

Re: Bolland Auto Stereoscope

Postby bryans fan » Sat Jun 08, 2019 9:38 am

Well worth the 15 year wait! !!GOODJOB!!


Who is online

Users browsing this forum: Google [Bot] and 1 guest