Recently been playing around with sand casting Alloy thought some of you might enjoy the process.
One of my games was missing the entire coin mechanism and after seeing a photo of a wonders Alwin with the 1d cast coin entrance I set about creating my own that used the games original holes.
Firstly I cut a piece of Perspex to size marked and cut the holes for the screws and the slot then scribbled out where I wanted the 1d.
Once I was happy enough I started carving out the Perspex with the dremel and all its wonderfull little attachment to make my pattern,
Once the pattern was done I built a box for my sand mould and made the the mould
Fires up the old home made furnace melted down a few old cans and made myself a coin entrance.
Hopefully this video works and I’ll attach a few photos