Discuss our on-site auctions and other slot machine auctions.
User avatar
gameswat
Posts: 1917
Joined: Sat May 30, 2009 5:17 am
Location: perth, australia

Re: Helicopter Race

Postby gameswat » Sat Aug 24, 2019 2:38 pm

Would I be right in thinking the added floats on these things are actually the weights needed to bring them down quickly? Seems like a much better way to weight them down than putting something inside those fragile plastic bodies.

Also on watching the game in action it seems the fan mounted down below does a fantastic job of getting the rotors running just long enough to reach the top of the game, these are bloody quick games compared to all the other race games I've played, most are exhaustingly slow.

User avatar
treefrog
Posts: 3880
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Helicopter Race

Postby treefrog » Sat Aug 24, 2019 4:32 pm

Thanks Pete, that is useful. Is the microswitch maybe used for the fan when the game is engaged or is this part of the win light circuit

A microswitch to engage the fan makes sense and as previously suggested kicks when engaged at the beginning with enough power to spin the blades during duration of flight.

These helicopters definitely don’t look like a airfix model, maybe custom made. Also the floats as mentioned look added and as Gameswat says I reckon were the weights which would be needed to get down, like monkey climbers are lead... The ends of the lines holding the helicopters are dampened with springs to prevent too much damage. Whenever you get a chance with the wooden ones as I reckon they will be same as mine, which have a little man in them and weight enough to drop....

So the voltage question was right for the win lights, as the frame is part of the circuit, so needs to low.....
5209B8E5-3FFF-4693-8817-EE52C0198A4.jpg

mr merrivale
Posts: 70
Joined: Wed Apr 27, 2016 1:08 pm

Re: Helicopter Race

Postby mr merrivale » Sun Aug 25, 2019 12:35 pm

Hi
Please find the wooden helicopters in racer as promised.
Also I am not sure the plastic one are weighted, or the weight is just in the construction of the helicopter bracket?
Tom - the switch for the fan is totally separate, being 240v to the low voltage win lights, but the light house is 240v - again a separate to win low voltage lights.
20190825_090224a.jpg

blikspeelgoed
Posts: 11
Joined: Sat Sep 12, 2009 7:28 am

Re: Helicopter Race

Postby blikspeelgoed » Wed Jan 20, 2021 3:32 pm

Last week I restored both helicopters from my R&W Helicopter race. Thought it would be nice to share some pictures.
Both mounting point cracked overtime, most likely because the weight from the floats and copper bracket (for mounting the floats) isn't supported / attached to the mounting point.
To remove the old paint I soaked the bodies in Blue Wonder for 2 days, worked perfectly!
IMG_4253.JPG
IMG_4251.JPG
IMG_4250.JPG
IMG_4186.JPG
IMG_4185.JPG
IMG_4184.JPG

User avatar
treefrog
Posts: 3880
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Helicopter Race

Postby treefrog » Thu Jan 21, 2021 6:35 pm

Thanks for sharing and nice job made. Good to see how they were made up. Probably will keep my wooden ones as never found a model suitable and suspect they had these made for them. Looks like the floats are wood on the originals as well.... !!THUMBSX2!!


Who is online

Users browsing this forum: No registered users and 11 guests