Somebody knows... Maybe you?
pauljt71
Posts: 42
Joined: Wed Nov 06, 2019 8:56 pm
Location: Nottinghamshire

Re: Mills Hi Top Projects

Postby pauljt71 » Fri Jan 03, 2020 8:52 pm

I think it’s a mixture of the timing out and incorrect reel labels. Misalignment and the fingers do not go into the holes correctly. I have put this one aside while I work on another machine now.

Today I learned the importance of the coin tube push lever overflow spring! Couldn’t understand why the machine was constantly jamming before discovering the overflow leave a spring was missing.

I installed a mech into the yellow cabinet machine today. It seems quite an early mech as the timing bar is different from the others. Pics attached.
7FC3BBD7-9921-4A31-841C-05E512DDF47a.jpg
B621E58E-B4FF-4001-8B00-AF36DD1CD49a.jpg
346802FF-E9DB-4710-A89C-E465D5567F3a.jpg

User avatar
coppinpr
Posts: 3962
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Mills Hi Top Projects

Postby coppinpr » Sat Jan 04, 2020 9:47 am

That clock needs lightly oiling. Better still, if you can remove it and totally dismantle it. Could go another 50 years if you treat it well. :D

pauljt71
Posts: 42
Joined: Wed Nov 06, 2019 8:56 pm
Location: Nottinghamshire

Re: Mills Hi Top Projects

Postby pauljt71 » Sun Jan 26, 2020 7:43 pm

I have learnt so much about these machines since purchasing them. Thank you to everyone on the forum for all of the help.
Today I have been cleaning and removing one of the clocks. I think I’ve just about cracked it now. Managed to make three good machines from the five broken ones. Need lots of bits though to make up the Boland machine. Anyone know of a good resource to acquire a hightop bonnet?
2F1529AC-CB96-421A-AD53-F9D63ABA115C.jpeg

User avatar
coppinpr
Posts: 3962
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Mills Hi Top Projects

Postby coppinpr » Sun Jan 26, 2020 10:29 pm

Well done, so pleased you have become a keen slotty... The rest of your family might not be so pleased. ^{}^

pauljt71
Posts: 42
Joined: Wed Nov 06, 2019 8:56 pm
Location: Nottinghamshire

Re: Mills Hi Top Projects

Postby pauljt71 » Fri Apr 03, 2020 6:01 pm

So, seeing as I have lots of time on my hands right now........today I stripped and started to repaint the Jewel Hi Top.

I have found some great paint online that matches the red almost perfectly. I wiped the original crinkle paint down with white spirit and then have sprayed a couple of light coats of the new paint straight on top. It seems to be drying well and the original crinkle finish is showing through nicely.

Satin black over the oak on the lower sections with the red to go on tomorrow. I found an original paper label with cabinet number that matches the one stamped into the wood.
CC066CFF-9E2B-47B4-9EEF-7FD9746E2614a.jpg
03F2F2CA-998D-46FD-A366-5CB52AE1B730a.jpg
0A131414-F9D5-40BE-BC3F-18CCDFC5015Aa.jpg
6A69BDC2-1960-4184-9D60-9487B626DB18a.jpg
7AAE1ED3-51CC-456C-B862-AE20291CECBCa.jpg
AAEA4F0C-A7CE-4A70-A6F7-B7593567A44Da.jpg
82464520-C84F-48F8-9405-0F3C74DDF142a.jpg

User avatar
badpenny
Forum Moderator
Posts: 6117
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Mills Hi Top Projects

Postby badpenny » Fri Apr 03, 2020 6:19 pm

pauljt71 wrote:
Sun Jan 26, 2020 7:43 pm
...... I have been cleaning and removing one of the clocks. I think I’ve just about cracked it now ......
What size hammer were you cleaning it with?

BP !PUNISH!

User avatar
coppinpr
Posts: 3962
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Mills Hi Top Projects

Postby coppinpr » Fri Apr 03, 2020 9:14 pm

you must be more careful when posting on threads BP reads ,he will pull you up on every little mistake and play on words....its his only bit of fun these days.... we pretend not to notice buttkick


Who is online

Users browsing this forum: brigham, coppinpr and 4 guests