Novomat on 3D
Novomat on 3D
Hi folks,
This particular machine has come with a collection of others I have recently purchased. It does not fit with the rest of the collection as it runs on three pennies and all my other machines run on old one penny.
First question, can it easily be converted to old penny?
Second question, if not, could someone give me some guidelines as to what to ask for it as I would like to sell it or possibly swap it for an old penny version.
Thanks
This particular machine has come with a collection of others I have recently purchased. It does not fit with the rest of the collection as it runs on three pennies and all my other machines run on old one penny.
First question, can it easily be converted to old penny?
Second question, if not, could someone give me some guidelines as to what to ask for it as I would like to sell it or possibly swap it for an old penny version.
Thanks
Re: Novomat on 3D
I would not try to convert. I probably have bits to except the to Novomat casting coin entry which were cut to support the big penny. I would sell and buy a penny machine, a lot easier.
I like the dark border veneer on the front...
Value, who knows...? Today two machines sold for silly money at auction... luck of the day and right person wanting at the time... I would guess if working around £200.
I like the dark border veneer on the front...
Value, who knows...? Today two machines sold for silly money at auction... luck of the day and right person wanting at the time... I would guess if working around £200.
Re: Novomat on 3D
Many thanks, as always. I think you are right. I will list it for sale on here and see what happens. The machine is very clean inside and seems to work correctly from the tests I have made today.
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Novomat on 3D
One thing is for sure, the 3d payout slides will be 10 times stronger than those drilled out to take 1D.
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Novomat on 3D
Well I for one await your advert with interest.
I've had umpteen of these, and I love bandits on thruppennies.
BP
I've had umpteen of these, and I love bandits on thruppennies.
BP
Re: Novomat on 3D
It actually takes threepenny bits, rather than three individual pennies.
These are the machines I look out for, never having had the funds to play them until the late '60s, when Crompton's Threepenny Derby came out.
I'm still narrowly avoiding these Wulff types; I know that once I buy the first one...
These are the machines I look out for, never having had the funds to play them until the late '60s, when Crompton's Threepenny Derby came out.
I'm still narrowly avoiding these Wulff types; I know that once I buy the first one...
Re: Novomat on 3D
It is interesting I have noticed that Gunter Wulff machines seem to be attaining much higher prices recently and not just a one off auction bid war. Looking at the Elephant results there has been a growing upward price trend. A couple at a local auction to me recently got into the late 300s and the two poor condition items in Eastbourne reaching over 400 with commission. Maybe my estimate on your machine was a bit mean.......
What makes me laugh though is a lot of this is blind bidding. The Eastbourne ones were case in point, the second one at £434 had a rough case and did not work with completely broken coin mechanism due to pot metal rot. The important think with these machines is they need to be checked for metal fatigue and operating state as they can be a pain in the arse to strip and get working correctly when seized and as soon as you touch parts they can break where weakness exists in the metal. Having said that I have enjoyed working in them and love the action of the mechanism, mesmerizing....
What makes me laugh though is a lot of this is blind bidding. The Eastbourne ones were case in point, the second one at £434 had a rough case and did not work with completely broken coin mechanism due to pot metal rot. The important think with these machines is they need to be checked for metal fatigue and operating state as they can be a pain in the arse to strip and get working correctly when seized and as soon as you touch parts they can break where weakness exists in the metal. Having said that I have enjoyed working in them and love the action of the mechanism, mesmerizing....
Re: Novomat on 3D
Although mainly an Allwin fan, I do like these German machines. Anyone know why their mechs appear to be less complicated than say a Mills, Jennings, etc? Is there a fundamental difference between these and 'traditional' bandits?
Re: Novomat on 3D
Thanks Treefrog, I would be happy to swap this machine with someone that has one running on old penny. Failing this I can sell and use the funds towards a new Allwin etc. I thought £300 was a reasonable price... Market Advert here.treefrog wrote: ↑Fri Jan 10, 2020 9:54 am It is interesting I have noticed that Gunter Wulff machines seem to be attaining much higher prices recently and not just a one off auction bid war. Looking at the Elephant results there has been a growing upward price trend. A couple at a local auction to me recently got into the late 300s and the two poor condition items in Eastbourne reaching over 400 with commission. Maybe my
estimate on your machine was a bit mean.......
Who is online
Users browsing this forum: Bing [Bot], Semrush [Bot] and 46 guests