Discuss our on-site auctions and other slot machine auctions.
User avatar
pennymachines
Site Admin
Posts: 5113
Joined: Wed Nov 06, 2002 12:12 am
Location: The Black Country
Contact:

Re: Las Vegas bandit

Postby pennymachines » Sun Aug 26, 2018 1:52 pm

The Old Dog and Anvil - we always end up there eventually.
DogandAnvil.jpg

User avatar
badpenny
Forum Moderator
Posts: 6368
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Las Vegas bandit

Postby badpenny » Sun Aug 26, 2018 1:53 pm

I believe it's your round Mr P.

BP !!CHEERS!!

User avatar
dutchboy
Posts: 326
Joined: Sun Oct 19, 2014 8:28 pm
Location: Netherlands

Re: Las Vegas bandit

Postby dutchboy » Sun Feb 16, 2020 5:20 pm

I just found an old piece of aluminium at my work and remembered my machine needed the window surround. It’s a bit rough yet but looks much better for the moment till I will find an original.
Lately there were not so many posts over here, so I think I need to contribute.
Greetings.
091903F0-6303-4289-B9F1-621CD6FB8FCC.jpeg

User avatar
treefrog
Posts: 3754
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Las Vegas bandit

Postby treefrog » Sun Feb 16, 2020 7:57 pm

Yes very good Dutchboy, I would not have know.

Yes very quiet on the site and have laid low myself for a while. I have been busy though and restored two Aristocrats and now working on a pile of Beromat type machines I took apart years ago and trying to piece together.....
576EB04E-4A7B-4526-B90D-F6C6743E3DE2a.jpg
5C264202-5A1A-4866-AEEF-347D74A45891a.jpg
Also been finally learning Paint Shop Pro after buying a few years back and finding it too complicated.....think I have now worked out enough to do some artwork myself at last...
Before
454B3778-5ED6-4EFC-BD0E-6E7EBECE3506a.jpg
After
3FD56186-A15C-4F7E-85AF-92F6EDFA136F.jpeg
Maybe everyone else is busy on machines or just can’t be bothered anymore..

User avatar
dutchboy
Posts: 326
Joined: Sun Oct 19, 2014 8:28 pm
Location: Netherlands

Re: Las Vegas bandit

Postby dutchboy » Mon Feb 17, 2020 7:07 pm

Very nice done on the strips treefrog. I have to say I don’t even have a desktop these days.
So I am not the only one who takes a machine apart and leave it for a very long time :D . I only have to paint my Mills open front and make two coin tubes. Maybe in spring the time will be right.

cheeky
Posts: 483
Joined: Thu Mar 31, 2005 8:19 pm
Location: North East Essex

Re: Las Vegas bandit

Postby cheeky » Thu Feb 27, 2020 11:22 pm

Very nice job on the reel strip. 👍

chris rideout
Posts: 132
Joined: Sat Mar 27, 2010 8:25 am

Re: Las Vegas bandit

Postby chris rideout » Mon Mar 02, 2020 2:21 pm

dutchboy wrote:
Sun Feb 16, 2020 5:20 pm
I just found an old piece of aluminium at my work and remembered my machine needed the window surround. It’s a bit rough yet but looks much better for the moment till I will find an original.
Lately there were not so many posts over here, so I think I need to contribute.
Greetings.
Your machine looks very much like a "Mad Money" by Sega. Most of them were red and black. The top box is missing. Good luck with your restoration.

User avatar
coppinpr
Posts: 4067
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Las Vegas bandit

Postby coppinpr » Mon Mar 02, 2020 7:51 pm

I think the machine is a clone not a Sega so the "las Vegas" logo is most likley original

chris rideout
Posts: 132
Joined: Sat Mar 27, 2010 8:25 am

Re: Las Vegas bandit

Postby chris rideout » Tue Mar 03, 2020 1:08 pm

badpenny wrote:
Sat Aug 25, 2018 3:51 pm
Your photo is of the dog and anvil.

BP !BOGROLL!
Is the dog piece upside down? Either it is or mine is! I thought the longest part was at the bottom.

User avatar
badpenny
Forum Moderator
Posts: 6368
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Las Vegas bandit

Postby badpenny » Tue Mar 03, 2020 3:46 pm

The photo is on end, it needs turning 90° clockwise.

BP :cool:


Who is online

Users browsing this forum: No registered users and 13 guests