Gunter Wulff Arizona
Gunter Wulff Arizona
Hi,
I have this machine and want to restore it. I am needing some parts. I hope someone can point me in the right direction. I've uploaded some pics. I am an auto electronics engineer and mechanical engineer. I have lathes and milling machines. I have done many vehicle restorations, etc, but never a penny machine, but I like the style of these on the wall type machines.
Any and all help would be greatly received with thanks. I broke the glass front today digging it out of the back of the workshop.
Many thanks, martin.
I have this machine and want to restore it. I am needing some parts. I hope someone can point me in the right direction. I've uploaded some pics. I am an auto electronics engineer and mechanical engineer. I have lathes and milling machines. I have done many vehicle restorations, etc, but never a penny machine, but I like the style of these on the wall type machines.
Any and all help would be greatly received with thanks. I broke the glass front today digging it out of the back of the workshop.
Many thanks, martin.
Re: Gunter Wulff Arizona
Hello Martin,
Shame about that glass, not something you will likely find a replacement for. Funny enough I have a Arizona glass which had a break in the corner, not across the artwork, but the machine was scrap, but still have the glass.
It looks like there is a break on the damper arm as well in one of your pictures. You would need to advise beyond the glass what help you need. Is the rest of the machine complete?
This looks like the Arizona that sold on eBay a week ago.
https://www.ebay.co.uk/itm/Arizona-frui ... true&rt=nc
Shame about that glass, not something you will likely find a replacement for. Funny enough I have a Arizona glass which had a break in the corner, not across the artwork, but the machine was scrap, but still have the glass.
It looks like there is a break on the damper arm as well in one of your pictures. You would need to advise beyond the glass what help you need. Is the rest of the machine complete?
This looks like the Arizona that sold on eBay a week ago.
https://www.ebay.co.uk/itm/Arizona-frui ... true&rt=nc
Re: Gunter Wulff Arizona
Hi treefrog, yes that's the one. As you can see, I didn't pay a lot.
Thank you so much for your reply and interest, it is really appreciated.
I have two of the clamp brackets missing and the broken arm as you saw. Is there a mechanical set up manual or drawings available for this? Hi how much for the glass? I have been onto a man today l know about laser printing the picture and the plain glass is going to cost me £16.00, 5mm thick from a local window manufacturer. That arm that's broken is a pain but it may tig weld,
I will be stripping it down soon, as soon as l can find a drawing or an assembly guide, thanks.
I was looking on German ebay today. There are some good deals. I like the on the wall type machines, thanks.
Thank you so much for your reply and interest, it is really appreciated.
I have two of the clamp brackets missing and the broken arm as you saw. Is there a mechanical set up manual or drawings available for this? Hi how much for the glass? I have been onto a man today l know about laser printing the picture and the plain glass is going to cost me £16.00, 5mm thick from a local window manufacturer. That arm that's broken is a pain but it may tig weld,
I will be stripping it down soon, as soon as l can find a drawing or an assembly guide, thanks.
I was looking on German ebay today. There are some good deals. I like the on the wall type machines, thanks.
Re: Gunter Wulff Arizona
You would have to share pictures of the problem parts, eg clamps.
You could scan and get printed. One of our members on here offers this service and has a printer of the size to do. I would have to dig out the one I have and check its state, but may work. Www.endofthepier.com
There are no guides other than the knowledge of people who can help, like on this forum.
Welding the metal used I suspect may be a challenge as it is an alloy with a heavy zinc content. I can’t believe you can tig weld and would probably melt.
I do have a lot of parts for the mechanicals of these machines, so may be able to help…
You could scan and get printed. One of our members on here offers this service and has a printer of the size to do. I would have to dig out the one I have and check its state, but may work. Www.endofthepier.com
There are no guides other than the knowledge of people who can help, like on this forum.
Welding the metal used I suspect may be a challenge as it is an alloy with a heavy zinc content. I can’t believe you can tig weld and would probably melt.
I do have a lot of parts for the mechanicals of these machines, so may be able to help…
Re: Gunter Wulff Arizona
Hi tree frog, ok I will strip out the working unit from the case over the weekend, and start to collate what I need and send you pics.
Cheers, thank you so much for your help, it has been invaluable.
Cheers, thank you so much for your help, it has been invaluable.
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Gunter Wulff Arizona
Be careful when pulling it all down.
It's not unusual after undoing a nut & bolt clamp on the mech to find it's also got a stainless steel pin through the two parts.
BP
It's not unusual after undoing a nut & bolt clamp on the mech to find it's also got a stainless steel pin through the two parts.
BP
Re: Gunter Wulff Arizona
Hi,
Am I able to get the keys cut for these locks, based on the serial number or will I need to get locks with keys? Pics of my locks below.
I will be breaking it all apart over the weekend, thanks. I am looking for another one of the same type I just missed on on ebay, see below.
Am I able to get the keys cut for these locks, based on the serial number or will I need to get locks with keys? Pics of my locks below.
I will be breaking it all apart over the weekend, thanks. I am looking for another one of the same type I just missed on on ebay, see below.
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Gunter Wulff Arizona
A quick search for Zeiss locks on this forum comes up with more than 40 posts
https://www.pennymachines.co.uk/Forum/s ... eiss+locks
I bought my first Gunter Wulff machine in 1971, and although some claim success in getting keys cut and even getting hold of blanks, I never have.
BP
https://www.pennymachines.co.uk/Forum/s ... eiss+locks
I bought my first Gunter Wulff machine in 1971, and although some claim success in getting keys cut and even getting hold of blanks, I never have.
BP
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Gunter Wulff Arizona
See my post in this topic on Locks for a Beromat /Gunther Wulff wall machine. Not sure if it still applies...
Re: Gunter Wulff Arizona
I have been able to get two sets of Zeiss locks rekeyed. So I don't have to repeat the story, have a look at Re: My Rotomat Juwel and Duomat penny arcades
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Gunter Wulff Arizona
For future reference, I've posted over the essentials to Tips & Tricks: Keying German wall machine Zeiss Icon locks
Re: Gunter Wulff Arizona
treefrog
Hi, I still have not found the time to break it down, maybe over xmas.
Did you say you might have a complete front glass etc.?
thanks
Hi, I still have not found the time to break it down, maybe over xmas.
Did you say you might have a complete front glass etc.?
thanks
Who is online
Users browsing this forum: No registered users and 43 guests