Oliver Whales Win A Kit Kat
Oliver Whales Win A Kit Kat
I’m after some advice please.
What size ball bearing should I use, any preferences to the ball type?
Also the chrome hammer cover, should the chrome plate part be soldered on, mine seems to have what I guess is a rubber hammer stop missing? Does anyone have a photo of what it should look like?
Thanks
What size ball bearing should I use, any preferences to the ball type?
Also the chrome hammer cover, should the chrome plate part be soldered on, mine seems to have what I guess is a rubber hammer stop missing? Does anyone have a photo of what it should look like?
Thanks
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
Re: Oliver Whales Win A Kit Kat
The balls are 9/16" chromium-plated hardened steel.
Yes, the face plate should be soldered to the frame, and there should be a steel collar soldered below the aperture to hold a short piece of half inch diam. solid round rubber rod to dampen the hammer arm.
Yes, the face plate should be soldered to the frame, and there should be a steel collar soldered below the aperture to hold a short piece of half inch diam. solid round rubber rod to dampen the hammer arm.
Who is online
Users browsing this forum: No registered users and 21 guests