Sega lighting question
Sega lighting question
Hello,
Have a Sega Mad Money that has a loose fluorescent tube.
Have been told it mounts on the escalator. Could anyone post a photo of their machine with the light in place?
Also looking for a manual so I can tune this machine up.
Thanks!
Go
Have a Sega Mad Money that has a loose fluorescent tube.
Have been told it mounts on the escalator. Could anyone post a photo of their machine with the light in place?
Also looking for a manual so I can tune this machine up.
Thanks!
Go
Re: Sega lighting question
Here's a photo I have to hand. I think it mounts from the reel surround casting rather than the escalator but will check again when I can access the machine.
- Attachments
-
- V22Y7IRh.jpg (21.98 KiB) Viewed 828 times
Re: Sega lighting question
Thanks for the photo.
I still can’t see exactly where it mounts.
If you could get a close photo, it would be greatly appreciated!
I still can’t see exactly where it mounts.
If you could get a close photo, it would be greatly appreciated!
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Sega lighting question
My addled brain seems to think a strip of aluminium secured with a self tapper to the case. And a spring clip pop rivetted to each end to hold the tube is what's usually found.
BP
BP
- special when lit
- Posts: 498
- Joined: Fri Dec 17, 2004 4:46 pm
- Reaction score: 2
- Location: Derby
Re: Sega lighting question
Phan. I was the one who replied to you, on the C O C F. On the ones I've had, there is a strip of metal that screws to a 'tag' on the bottom of the escalator, with clips like BP posted, on either end.
Would be easy to make something up, if it's missing.
Would be easy to make something up, if it's missing.
Re: Sega lighting question
Still a bit puzzled, apologies for being a bit thick ;)
So the lamp is the same width as the other bulbs that light the award glass.
The tombstone ends of the lamp have a mounting bracket, but with the bulb installed, they seem too wide.
Thinking the bulb attaches forward of the bracket with the yellow arrows?
So the lamp is the same width as the other bulbs that light the award glass.
The tombstone ends of the lamp have a mounting bracket, but with the bulb installed, they seem too wide.
Thinking the bulb attaches forward of the bracket with the yellow arrows?
-
- Posts: 1129
- Joined: Thu Sep 10, 2009 8:13 pm
- Reaction score: 4
Re: Sega lighting question
My two lightups have a smaller width tube installed in this position.
I cannot sort a picture as it's high up in racking and I cannot move it for pictures.
I cannot sort a picture as it's high up in racking and I cannot move it for pictures.
Re: Sega lighting question
I finally got it straightened out- was a tiny 150 mm T5 tube.
Lights up the escalator coins and reels perfectly.
Thanks for the help!
Lights up the escalator coins and reels perfectly.
Thanks for the help!
Who is online
Users browsing this forum: Google [Bot] and 80 guests