Anyone looking for a worthwhile (but hard) project?

[coppinpr]

Someone contacted me through my website asking if I knew anyone who might be interested in taking on this project. He has this rare Jennings machine in very poor condition (including the case) and wants to know if I know anyone interested in buying(?) it. The machine is a rare 1939 Jennings "Good Luck", a very early, all-electric console machine.
The first few photos are of the project, the last photo is one of a similar machine in good condition. Interest will be limited as it's in the USA but it's still an interesting machine to see. Anyone interested PM me with your email and I'll pass it on.

Image1.jpg (1.66 MiB) Viewed 636 times

Image2.jpg (2.23 MiB) Viewed 636 times

Image3.jpg (2.2 MiB) Viewed 636 times

Image4.jpg (2 MiB) Viewed 636 times

Image6.jpg (2.07 MiB) Viewed 636 times

Image7.jpg (2.15 MiB) Viewed 636 times

Image8.jpg (189.07 KiB) Viewed 636 times

|`

[aristomatic]

Not for me, I'm afraid. Even if it was free shipping, to my front door.

Counted at least 5 wires and that's probably 5 wires too much for me.

[coppinpr]

I agree, Im no good with electrickery