Locked Jennings Governor

Somebody knows... Maybe you?
chance10
Posts: 46
Joined: Fri Jul 26, 2024 8:55 am
Reactions score: 4

Re: Locked Jennings Governor

Post by chance10 »

A part ça, j'ai lustré la partie basse et ce n'est pas trop mal je crois!
chance10 wrote:Other than that, I polished the lower part and it's not too bad I think!
Attachments
IMG_2927.jpg
IMG_2927.jpg (60.72 KiB) Viewed 348 times
User avatar
coppinpr
Posts: 5320
Joined: Sun Oct 10, 2010 2:01 pm
Reactions score: 69
Location: Lewes, East Sussex
Contact:

Re: Locked Jennings Governor

Post by coppinpr »

Le plus simple est de découper un nouveau joint. Une ceinture en cuir ou une feuille de feutre épaisse fera parfaitement l'affaire.
coppinpr wrote:The easiest way is to cut out a new gasket. A leather belt or a sheet of thick felt will do the job perfectly.
chance10
Posts: 46
Joined: Fri Jul 26, 2024 8:55 am
Reactions score: 4

Re: Locked Jennings Governor

Post by chance10 »

D'accord, je vais essayer avec votre méthode qui en effet est simple et peu couteuse.
Merci.
chance10 wrote:Okay, I will try your method which is indeed simple and inexpensive.
Thanks.
chance10
Posts: 46
Joined: Fri Jul 26, 2024 8:55 am
Reactions score: 4

Re: Locked Jennings Governor

Post by chance10 »

Par chance, j'ai retrouvé dans mon stock un joint qui fait le job. Le bras revient un peu vite mais aprÚs un bon
rĂ©glage cela devrait ĂȘtre correct!
Bonne nouvelle, la machine commence Ă  payer (3 et 5 ). :cool:
chance10 wrote:Luckily, I found a seal in my stock that does the job. The arm comes back a little quickly but after a good adjustment it should be correct! Good news, the machine is starting to pay (3 and 5).
chance10
Posts: 46
Joined: Fri Jul 26, 2024 8:55 am
Reactions score: 4

Re: Locked Jennings Governor

Post by chance10 »


IMG_2958.jpg
IMG_2958.jpg (70.04 KiB) Viewed 200 times

AprÚs une matinée ou presque passée sur le jackpot, c'est ok : il paye. :cool:
Pour le reste des gains tout est ok sauf les deux gains qui doivent payer 18 !
Pour le moment je n'arrive pas Ă  comprendre la raison. Une modification sur la machine?
chance10 wrote:After a morning or so spent on the jackpot, it's ok: it pays. :cool:
For the rest of the payouts everything is ok except the two which should pay 18!
At the moment I can't understand why. A modification to the machine?
User avatar
coppinpr
Posts: 5320
Joined: Sun Oct 10, 2010 2:01 pm
Reactions score: 69
Location: Lewes, East Sussex
Contact:

Re: Locked Jennings Governor

Post by coppinpr »

Il est peu probable qu'une modification ait été apportée à la machine. Quelle est l'utilité de ces paiements maintenant? Payer un montant différent ou ne pas payer du tout? Lorsque ces paiements apparaissent, les doigts de paiement vont-ils jusqu'au bout des disques de paiement?
coppinpr wrote:Unlikely a modification to the machine. What do those payouts do now? Pay a different amount or not pay at all? When these payouts come up, do the payout fingers go all the way through the payout discs?
chance10
Posts: 46
Joined: Fri Jul 26, 2024 8:55 am
Reactions score: 4

Re: Locked Jennings Governor

Post by chance10 »

Oui, ils vont jusqu'au bout des disques de paiement!

Les deux parties supérieures ont été déchromées par un professionnel.
Je pense que je vais les poncer le mieux possible avant de polir...
chance10 wrote:Yes, they go all the way into the payment discs!

The two upper parts have been dechromed by a professional.

dechromage2.jpeg
dechromage2.jpeg (63.34 KiB) Viewed 139 times


dechromage.jpeg
dechromage.jpeg (79 KiB) Viewed 139 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest