Page 1 of 2

Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 6:34 am
by rattitude
Because my precious Allwin was missing its payout mechanism, I had to make my own.
Ta-da! %|%
You'll see that I melted the aluminium coin hopper with my semi-inept brazing skills, but here it is.
Works like a charm.
The first picture is an original that I used as a model.

Re: Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 8:25 am
by badpenny
Really good, something to be proud of there, well done! !THUMBS!

Re: Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 9:02 am
by slotalot
wow! !THUMBS!
are you sure you haven't done this before?
Top Job !!HOORAY!!

Re: Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 12:48 pm
by lunaparkkid
Excellent work.

Ian.

Re: Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 3:54 pm
by arrgee
Very good, where did you obtain a tube of the correct diameter?

Re: Homemade Allwin payout mechanism

Posted: Thu Apr 22, 2010 8:29 pm
by rattitude
Thanks for all the feedback. I simply could not have built this without all of the help I received here.
It was such a fun part of the project that several other ongoing projects had to wait in the wings.
The tube is standard 1.5" OD aluminum tubing. The OD is larger than an original because I couldn't get any std stock with thinner walls. The ID matches the original, however.
The main body is 1/4" thick aluminum angle with a 2" side and a 3" side.
The rest is standard 1/8" bar stock.
I'm lucky to be in the neighborhood of onlinemetals.com. Great company, great service, great prices.
Thanks again!

Re: Homemade Allwin payout mechanism

Posted: Fri Jan 30, 2015 1:26 pm
by slotman
Hi.

I see these posts is a little bit old, but hope you guys are still here. I really need a payout mechanism to my Allwin Strike. Do anyone have that, or maybe can make one? :)
Really liked the one you made Rattitude, and would love to get one to my machine. Can't find it anywhere on the internet or in Norway where I live.

Re: Homemade Allwin payout mechanism

Posted: Fri Jan 30, 2015 2:27 pm
by badpenny
Hi slotman and welcome to the forum.

Best thing you can do first is to post photos of your Allwin inside and out so we can see exactly what's missing.

BP

Re: Homemade Allwin payout mechanism

Posted: Fri Jan 30, 2015 3:06 pm
by slotman
Thanx, looks like a nice forum :)

Here are some pics of the machine inside and out. Looks like its just the payout mechanism that is missing.

Re: Homemade Allwin payout mechanism

Posted: Fri Jan 30, 2015 3:42 pm
by badpenny
OK , your machine was made by the now defunct Nostalgic Machines. Their entire stock was bought out by one of our members of this forum. I suspect he has now disposed of everything.

However as you correctly point out you are missing ....
the payout tube.
the payout slide and mounting.
the slide arm.

You should really put a wanted advert in The Market section, please follow this link to register and place your advert (for free) Click Here
Please confirm which coin size you need so forum members can see if any spares they may have/wish to sell would suffice.


Best of luck
BP