Aristocrat Espirit

Discuss our on-site auctions and other slot machine auctions.
Post Reply
reelhelp
Posts: 2
Joined: Wed Jan 04, 2017 9:04 am

Aristocrat Espirit

Post by reelhelp »

Gday,
Looking for some help on a 1978 Aristocrat Espirit Super Quadreel. Was working fine till I gave it to my sister. Came back jammed. I released the jam but now the coin won't fall completely to allow the arm to engage and all the reels don't spin. I'm assuming a clean will fix the coin drop. Also noticed the clock fan doesn't turn much. Don't know of anyone local to help. Can anyone offer some help as I'm not game to start taking it apart.
Thanks
Attachments
IMG_3025a.jpg
IMG_0868a.jpg
User avatar
coppinpr
Posts: 4216
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Aristocrat Espirit

Post by coppinpr »

Won't know who's local till you tell us where you are. :D
reelhelp
Posts: 2
Joined: Wed Jan 04, 2017 9:04 am

Re: Aristocrat Espirit

Post by reelhelp »

Ahh of course, sorry. Brisbane Australia
Thanks
User avatar
coppinpr
Posts: 4216
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Aristocrat Espirit

Post by coppinpr »

With that machine I kind of thought you might say that... No problem, someone from our colonial office will be on line soon I'm sure. :cool:
andydotp
Posts: 535
Joined: Sat Feb 25, 2012 4:35 pm

Re: Aristocrat Espirit

Post by andydotp »

Ah G'day mate,
Greets from Melb.
Sounds like someone's put a dodgy coin in so just give the coin head a good check & clean. She'll be apples then cobber.
AP.
User avatar
downunda
Posts: 27
Joined: Thu Jan 28, 2016 1:50 am
Location: Australia

Re: Aristocrat Espirit

Post by downunda »

Had my nieces stay with us over xmas. Let them use my pokies, and was very clear with the method. On the 10c machine 1 COIN AT A TIME. and on the 5c machine: NO MORE THAN 5 COINS AT A TIME.

20 minutes is all it took before they managed to coin jam BOTH machines. due to excess coins.

Women break machines. Dontcha know?! :) !PUNISH!
Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests