Fixing Gunther Wulff mechanism
-
- Posts: 7
- Joined: Wed Mar 14, 2018 4:17 pm
- Reaction score: 0
Fixing Gunther Wulff mechanism
Hello
I don't know what this part is called but I need one.
Any suggestions?
Many thanks
I don't know what this part is called but I need one.
Any suggestions?
Many thanks
Re: Part need Gunther Wulff German mechanism
This looks like it is associated with the actuator, but not having a machine in front of me, can you clarify what the issue is?
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Part need Gunther Wulff German mechanism
When it has its spring connected it is the catch that engages the handle to the mech.
Without a coin in the gate an internal disc rotates obstructing the catch from engaging in its slot.
With a coin in the gate the disc stays put and allows play to commence.
Like TF asked why do you need a replacement? Apart from missing a spring, that one looks ok.
BP
Without a coin in the gate an internal disc rotates obstructing the catch from engaging in its slot.
With a coin in the gate the disc stays put and allows play to commence.
Like TF asked why do you need a replacement? Apart from missing a spring, that one looks ok.
BP
-
- Posts: 7
- Joined: Wed Mar 14, 2018 4:17 pm
- Reaction score: 0
Re: Part need Gunther Wulff German mechanism
It's broken end piece has chuck missing so not catching with handle pull
-
- Posts: 7
- Joined: Wed Mar 14, 2018 4:17 pm
- Reaction score: 0
Arm mechanism
Post merged - Site Admin.
I haven't a idea why the arm not catching
Movement working when turn by hand and paying out
Does any one have a image of a working arm and mechanism
Or look at my pics
Headache for a nooooobie
I haven't a idea why the arm not catching
Movement working when turn by hand and paying out
Does any one have a image of a working arm and mechanism
Or look at my pics
Headache for a nooooobie
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Arm mechanism
What machine is this? Is it German original or an English machine with a German mech? Can we see a photo of the machine? Is this a new problem or has it always done this?
-
- Posts: 7
- Joined: Wed Mar 14, 2018 4:17 pm
- Reaction score: 0
- coppinpr
- Posts: 5139
- Joined: Sun Oct 10, 2010 2:01 pm
- Reaction score: 27
- Location: Lewes, East Sussex
- Contact:
Re: Arm mechanism
I think we still need more photos and an idea of what is happening. As I said before, is this a new problem? Usually when the mech is placed in the case the two directly connect (unlike Mills type bandits where the two only connect when the arm is pulled). So is the problem on the mech side or the arm side?
Here is one I built a new case for. You can see the mech to arm connection at least.
Here is one I built a new case for. You can see the mech to arm connection at least.
Re: Fixing Gunther Wulff mechanism
Looking at one of my mechanisms, I can see this part only engages on one side, which is why it may have worn on the side you have an issue with. To confirm, the damage you have shown, does this prevent locking onto the handle when engaged, so does it slip over the top?
If this is causing your problem, I will look as I have piles of Beromat spares.
If this is causing your problem, I will look as I have piles of Beromat spares.
Who is online
Users browsing this forum: Bing [Bot], Google [Bot] and 30 guests