Page 1 of 1
Restoring award plates
Posted: Thu Oct 21, 2021 1:22 pm
by geordy55
Topic moved to Tips & Trips - Site Admin.
Me again after more advice.
What techniques do people use to restore metal award cards such as this one ?
Thanks in advance
Re: Restoring award plates
Posted: Thu Oct 21, 2021 6:56 pm
by treefrog
I rarely bother, too lazy, but you could carefully apply Vaseline to the non indented areas near where the indented areas are located and paint indented fruits and numbers with correct colours using enamel paint and when dry, wipe off the Vaseline applied areas…….. even if you miss an area with Vaseline, your nail should be able to remove the paint. Probably polish metal plate before painting.
Re: Restoring award plates
Posted: Wed Nov 03, 2021 8:53 am
by geordy55
Well, I gave it a go and I’m pretty happy with the result.
Re: Restoring award plates
Posted: Wed Nov 03, 2021 9:13 am
by geofflove
Looks great. What did you use?
Re: Restoring award plates
Posted: Wed Nov 03, 2021 4:11 pm
by geordy55
I put it into an ultrasonic cleaner which removed every bit of paint/ink, then under a microscope with a very fine brush added the paints back onto the plate. I used Tamiya lacquer paint.
Re: Restoring award plates
Posted: Wed Nov 03, 2021 8:07 pm
by treefrog
Excellent work
Re: Restoring award plates
Posted: Wed Nov 03, 2021 10:10 pm
by geofflove
Excellent. You must have a steady hand!
Re: Restoring award plates
Posted: Thu Nov 04, 2021 2:20 pm
by special when lit
I've got one to do, when I get around to restoring this.
I'll try your tips, & hope it turns out as good.