G'day Aussie newbie. Nutt and Muddle Royal Routine

Tell us a bit about yourself.
Post Reply
lozza
Posts: 2
Joined: Tue Nov 09, 2021 6:52 am
Reaction score: 0

G'day Aussie newbie. Nutt and Muddle Royal Routine

Post by lozza »

G'day guys, got this old Nutt and Muddle poker machine, no idea what year. Seems complete.
It's a bandit but has circuit boards, eproms but can't get it working, No display matrix so hard to identify faults. Hopefully the photo comes out OK.

Cheers Laurie
Attachments
IMG_20211109_173129a.jpg
aristomatic
Posts: 1129
Joined: Thu Sep 10, 2009 8:13 pm
Reaction score: 4

Re: G'day Aussie newbie. Nutt and muddle model?

Post by aristomatic »

Welcome,
I'm afraid your machine is beyond my experience.

Some members with more knowledge of this type of machine may come on to assist you. However, other forums may have more members with more experience in this type of machine. You could try https://www.fruitemu.co.uk/ib/

Others here may also advise, other forums too.
Hope it's an easy fix and you get up and running!
User avatar
moonriver
Posts: 930
Joined: Wed Oct 16, 2013 12:56 am
Reaction score: 3

Re: G'day Aussie newbie. Nutt and muddle model?

Post by moonriver »

aristomatic wrote: Tue Nov 09, 2021 8:50 am Hope it's an easy fix and you get up and running!
Nope, it's not an easy fix, unless you can steal parts from your other one?
tallstory
Posts: 180
Joined: Thu Apr 30, 2020 1:57 pm
Reaction score: 2

Re: G'day Aussie newbie. Nutt and muddle model?

Post by tallstory »

No experience of this machine either. The only advice I can give is to trace the voltages with a multimeter looking for blown fuses, shorts etc. BUT be very careful around mains voltages :shock: Old electrolytic capacitors are the main culprits for failures, so check to see if any show signs of burning or leakage.
Otherwise, good luck.
lozza
Posts: 2
Joined: Tue Nov 09, 2021 6:52 am
Reaction score: 0

Re: G'day Aussie newbie. Nutt and Muddle model?

Post by lozza »

Wish I could steal parts from the other one but it's an Aristocrat Microstar. Would love to get this one working. Surprisingly can't find any open door switch.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests