Hello from rural Hampshire

Tell us a bit about yourself.
Post Reply
steveinhants
Posts: 4
Joined: Wed Oct 18, 2023 11:33 am
Reaction score: 0

Hello from rural Hampshire

Post by steveinhants »

Nice to find this site. I've just acquired a "Royal" slot machine via auction, to join the Novomat that I've had for over 40 years (and also an electronic German m/c that works on Pfennigs). The condition seems reasonable for age, and appears to run well, but I'll have to sort out one or two payment issues (not helped by a bodge job conversion from 1d to 2p play). I'm not the most mechanically minded, so I'm sure that I'll be picking some of your brains on here.
Any idea who made the "Royal"? Mechanics appear not too dissimilar to the Novomat... but being a front-opening machine, I haven't yet had a close look.
Regards
Steve
pennymachines
Site Admin
Posts: 6602
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 39
Location: The Black Country

Re: Hello from rural Hampshire

Post by pennymachines »

Hi Steve and :WELCOME:

A few games used 'Royal' in their names. POS Automatenbau, Düsseldorf made Royal in 1954, but it's electromechanical mechanism is quite different from a Novomat.
steveinhants
Posts: 4
Joined: Wed Oct 18, 2023 11:33 am
Reaction score: 0

Re: Hello from rural Hampshire

Post by steveinhants »

Thanks for the welcome. This is it. The electrics are limited to some very dodgy wiring for strip lights...
Attachments
IMG_20231016_164928a.jpg
IMG_20231016_164928a.jpg (132.58 KiB) Viewed 1065 times
User avatar
brigham
Posts: 1169
Joined: Tue Oct 31, 2017 3:37 pm
Reaction score: 1

Re: Hello from rural Hampshire

Post by brigham »

That's likely to be a conversion of a Novomat, or some similar German type.
Can't imagine how the 2p coin conversion was done. The original conversion to Old Penny left the payout slides perilously thin, which, along with the pot-metal castings, didn't help with longevity.
steveinhants
Posts: 4
Joined: Wed Oct 18, 2023 11:33 am
Reaction score: 0

Re: Hello from rural Hampshire

Post by steveinhants »

Thanks for the reply Brigham. I've yet to investigate whether all the payout sliders are properly working (I have my doubts) - all I know is that the maximum payout is 8 x 2p instead of 12 x 1d, given the thickness difference between 1d and 2p. Other adjustments for the conversion seem to involve blu-tak and other Blue Peter-associated items. :dammit:
User avatar
coppinpr
Posts: 5059
Joined: Sun Oct 10, 2010 2:01 pm
Reaction score: 14
Location: Lewes, East Sussex
Contact:

Re: Hello from rural Hampshire

Post by coppinpr »

Welcome to the site, you will find it more helpful and busier than any slot forum in the world.
Definitely a UK re-vamp of a Novamat-type machine, it been seen with two or three different names, I've re-made glasses for at least three in the past including this "Duchess"
duchess 16a READY SIZED.jpg
duchess 16a READY SIZED.jpg (177.93 KiB) Viewed 1801 times

steveinhants
Posts: 4
Joined: Wed Oct 18, 2023 11:33 am
Reaction score: 0

Re: Hello from rural Hampshire

Post by steveinhants »

That looks very nice.
Unless I can convert back to old pennies and then sort the payouts properly, I might need one of those showing 5 coin payouts, rather than 4&8. :HaHa:
User avatar
arrgee
Posts: 1582
Joined: Thu Feb 08, 2007 11:56 am
Reaction score: 5
Location: North Wiltshire

Re: Hello from rural Hampshire

Post by arrgee »

brigham wrote:Can't imagine how the 2p coin conversion was done. The original conversion to Old Penny left the payout slides perilously thin

The 2p coin is almost 5mm smaller than the old 1d coin, so more metal would be available on each side of the slide.
User avatar
brigham
Posts: 1169
Joined: Tue Oct 31, 2017 3:37 pm
Reaction score: 1

Re: Hello from rural Hampshire

Post by brigham »

It might be better, initially, to leave it on the smaller coin. It must have had new slides, unless someone has carefully brazed the penny slides up.
It would probably take the pre-decimal ha'penny as it is, which might be a little bit odd, but at least gets rid of the decimal menace.
User avatar
coppinpr
Posts: 5059
Joined: Sun Oct 10, 2010 2:01 pm
Reaction score: 14
Location: Lewes, East Sussex
Contact:

Re: Hello from rural Hampshire

Post by coppinpr »

brigham wrote: Thu Oct 26, 2023 8:23 am It must have had new slides, unless someone has carefully brazed the penny slides up
It may have the original German slides depending on the size of the German coin used. If it was about the same size as the 2p then great, strong slides still in place. Do not try and drill them out for 1p they WILL break.

I'm just doing some new strips for this "Princess" model. Have to say, the best case I've ever seen on one of these.
Attachments
thumbnail.jpg
thumbnail.jpg (190.31 KiB) Viewed 1119 times
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest